I have connected the controller and it works fine, other than there is quite a delay on execution. Is there a way to speed it up so it doesn't fall behind during playback? Thanks.
I've found that most delays are caused by the network -- the ESPixelStick isn't getting the data fast enough. The stick itself is very fast.
There are a lot of folks here who are a lot smarter than I am when it comes to networking, but with the proper network settings, the ESPixelStick is quite quick and responsive.
What is your network/WiFi setup? Are you using Multicast on the ESP?
I've also had issues with the controller. I've not been able to get the performance expected from them. I've noticed lags, which is fair to assume is somewhat normal since it's wireless, however I've also noticed it will skip parts and/or go out of sequence and Intensity will vary.
I feel like I've setup and configured everything correctly but I am obviously not doing something right. I've got a video to show what I am talking about. Hopefully this will help with little_b and my issues.
My Setup:
Win 10 running Vixen 3
Netgear AC1750 802.11ac
ESPixelStick
Possibly pertinent info:
- Unicast, 100% sACN priority
- ESP is only defined controller
- ESP shows 6ms/194Hz refresh rate
- ESP shows RSSI as -38dBm/100%
- ESP reports 12,734 total packets with 2 sequence errors and no packet errors
- ESP and PC are the only devices connected to the router
The prop is my sign for my haunt. It reads "ScareCrowe Manor". There are 2 rows of led strips, each row is 71 pixels. I'm testing using the Chase effect which should fire from left to right and light the upper and lower pixels of each letter as is progresses. I did 2 runs, one at 5 seconds the other at 20 seconds.
Your network/router is more than likely your issue.Make sure your router is not connected to the internet. If you are connected to the internet you probably have traffic you are not aware of. I know when I was originally testing I encountered network congestion with other wifi signals sharing the same channels as my wifi. For example if I was streaming on my other network I would see lag, even though my 2 networks where not connected.
