ESPixelStick Flash ...
 
Notifications
Clear all

ESPixelStick Flash Tool

223 Posts
49 Users
0 Reactions
100.3 K Views
Posts: 355
(@bernard-2)
Honorable Member
Joined: 12 years ago
worksopian wrote:Picture of connected stick

probably not the issue but do you have power + and - connected? it seems on the picture that there is only 1 conductor...


Reply
Posts: 17
(@worksopian)
Active Member
Joined: 13 years ago

Yes I did try changing them over but the lights on the pixelstick went out and it still returned a programming failed message.


Reply
Posts: 17
(@worksopian)
Active Member
Joined: 13 years ago
-bernard- wrote:probably not the issue but do you have power + and - connected? it seems on the picture that there is only 1 conductor...

Its hard to see but it is there (black wire)


Reply
kwoodard
Posts: 281
(@kwoodard)
Reputable Member
Joined: 13 years ago

Did you get the esp8266 in programming mode by holding down the PROG button while hitting the RESET button? You should have the red light on and the blue light should begin blinking rapidly when the download is occurring.


Reply
Posts: 17
(@worksopian)
Active Member
Joined: 13 years ago
kwoodard wrote:Did you get the esp8266 in programming mode by holding down the PROG button while hitting the RESET button? You should have the red light on and the blue light should begin blinking rapidly when the download is occurring.

No that did not happen, I did hold down the program button and hit the reset but the lights didn't change?


Reply
Page 33 / 45
Share: