I'm running 300 5v pixels on the E682 as of now,but will be adding a 16 string Mega Tree next year. I am wondering if I should get 12v pixels and run 12v to one side for the 800 pixels for the MT. What do you guys think stick with 5v or go with 12v?
I've switched all to 12VDC. I've had better luck with with longer runs with less power injections.
I had a 54 string x 50 pixel megatree this year running on 5V without any power issues, but I connected each string to its own E682 output (so used 4x E682 - no injection).
That worked fine, and is very easy to set up. However, I think if you use any other type of setup, or longer strings, 12V would be simpler.
I have a 12 strands of 72 5v pixels on my tree on my e682. I did power inject at the end of each strand.
I ran 24 strings of 110 pixels each, 12V, no power injection and no color fading, I was very happy as I had already put the female ends on the end of each string in preparation for power injection... Now I'm making those strings 164 pixels, so power injection will certainly be back in the mix...I don't know why I feel the need to change things every single year...(that was my wife talking right there) :whtf:
