Same result with all univ. set to 510.
So I set these up in Vixen 3 and they seem to be working correctly, but I did notice that I seem to have to many 12v pixels on each output from my 682 because if I remove some, they work correctly, but act odd if I add more. How many can each output handle before power injection is needed?
ksmith247 wrote:Same result with all univ. set to 510.So I set these up in Vixen 3 and they seem to be working correctly, but I did notice that I seem to have to many 12v pixels on each output from my 682 because if I remove some, they work correctly, but act odd if I add more. How many can each output handle before power injection is needed?
Kyle, there is an update to the firmware for the E682 to Version 5.003-01. try that upgrade and see if that works for you. This upgrade takes care of random pixel colors that showed up down the string of pixels when using unicast, it had something to do with crossing universes. I don't know if it will help you but it fixed my problem with messed up pixel colors.
Gary
PS I inject every 50 but I am using 5V pixels, I think you can got to 80 but someone that uses 12V pixels can give you a better number.
Thanks for the help.
from what I see the 1-1 and 1-4 are both in universe 2.. that means that they are interfering with each other for the first 150 channels. they are both set to universe 2 and start on channel 1. HTH ~Steve
I noticed your start addresses are wrong. 1-1 ends at channel 345. The start address of 1-2 should be Universe 2 with start address 346. Set your timing to 200 and universe to 510.
Sent from my SM-T710 using Tapatalk
