I have two pixel strings attached to 1-1 and 1-2 of my E682 v5 running the test pattern. 1-1 pixels are showing the correct colors but the 1-2 are showing pink and green colors only on the chase test sequence.
Test 1:
I am using the diyledexpress waterproof connectors and the one on 1-1 is a 10' and 1-2 is 20' but I put a null pixel in the middle thinking the distance might be the issue, but it is still the same.
test 2.
Could power be the issue?
I injected power at the end of the 1-2 strand. No change.
I can attach the same strand to 1-1 output and it works properly. I can also hook the strand to 1-3 and 1-4 but get the same odd colors.
Any ideas? I can guarantee you it is something I am not doing correctly, but I am at a loss as what that could be.
can you post some screen shots of your 682 setup pages
I updated 1-2 to universe 2 like the other and now it is working correctly. I still have an issue I think, but not for sure how changing universes fixed it.
ksmith247 wrote:Here are the screenshots.
Kyle, try to set all your channels to 510 per univ. instead of 512.
Gary


