E682 and X/Lights
 
Notifications
Clear all

E682 and X/Lights

29 Posts
4 Users
0 Reactions
9,748 Views
Posts: 206
Topic starter
(@tallahassee-dreamer)
Reputable Member
Joined: 17 years ago
[#34762]

I have set up 16 strings of 2811's 50 pixels which means I am utilizing the full board on my 682. I need some help on configuring xlights and e682. Sean helped me configure my channels in xlights but, since he is not familiar with the 682 could not tell me how to assign universes in the 682 Config page. Could someone who utilizes this set up help? From what Sean told me the 682 setup needs to correspond with the channel count in xlights.


28 Replies
duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago

2400 channels (16 strings x 50 pixels x 3 channels per pixel)

Universe 101 1 510
universe 102 511 510
universe 103 1021 510
universe 104 1531 510
universe 105 2041 360

think this correct


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Literally just take the config from your E682 and set up your xLights network setup. The only semi-tricky thing is when your clusters cross universe. Let's say you go from 1/1 to 2/270 for example. You have to make sure to not use channels 511 or 512 so your config in xlights would be:
Universe 1 - channels 1 - 510
Universe 2 - channels 1 - 270

Then set up your models to match your particular prop.


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

Post a screenshot of your XLights setup and a current screenshot of your E682 setup.

Also, what will you be running? is it a tree or a matrix or??? Helps to know what you are trying to do and if possible your model configuration.


Reply
Posts: 206
Topic starter
(@tallahassee-dreamer)
Reputable Member
Joined: 17 years ago
budude wrote:Literally just take the config from your E682 and set up your xLights network setup. The only semi-tricky thing is when your clusters cross universe. Let's say you go from 1/1 to 2/270 for example. You have to make sure to not use channels 511 or 512 so your config in xlights would be:
Universe 1 - channels 1 - 510
Universe 2 - channels 1 - 270
Then set up your models to match your particular prop.

Perhaps I was going at it backwards, i was setting up xLights first and than trying to set up 682. I have 16 strings of ws2811's with 50 pixels, so if I'm right that is 150 channels. I'm using all 16 terminals on the 682. Pixel string count is set to 50, grouping is set at 1. So if I understand you right I start with universe 1, channel 1 and than select update. I than move to the second cluster and enter the ending universe and channel count plus 1. For example ending channel universe 4 channel 270 I would enter universe 4 channel 271 and so on. Each time I hit update. Is this correct so far? So if this is correct you say copy this config to XLights. Do I go to Xlights and select setup and select E131, and proceed to making 16 lines of 150 channels?


Reply
Page 1 / 6
Share: