Notifications
Clear all

E682 and ws2801

15 Posts
9 Users
0 Reactions
4,561 Views
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 17 years ago
[#22566]

nothing works!
i run it through vixen 2.15 and my FIRST pixel does not work as channeled in vixen
my first pixel is channel 569
in the J1sysE1.31 plugin (ch 569-5368)

universe 1
start 569 size 512 destination multicast local area connection ttl 1
universe 2
start 569 size 512 destination multicast local area connection ttl 1
universe 3
start 569 size 512 destination multicast local area connection ttl 1
universe 4
start 569 size 512 destination multicast local area connection ttl 1
universe 5
start 569 size 512 destination multicast local area connection ttl 1

there is NO point telling me to use a different light controller - not gonna change -especially not now.
my stupid light show STILL IS NOT RUNNING.


14 Replies
pmcpa
Posts: 1390
(@pmcpa)
Noble Member
Joined: 17 years ago

Is your vixen plugin set to multicast? Can you run the tests on the E682 and your pixels light up?


Reply
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 17 years ago
pmcpa wrote:Is your vixen plugin set to multicast? Can you run the tests on the E682 and your pixels light up?

start 569 size 512 destination multicast local area connection ttl 1


Reply
pmcpa
Posts: 1390
(@pmcpa)
Noble Member
Joined: 17 years ago

Sorry, missed that. Are you able to talk to the E682 web interface? Type test 1 and press enter, All pixels should turn red


Reply
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 17 years ago

yes, all the controller based tests work


Reply
Page 1 / 3
Share: