E682 and pixel stri...
 
Notifications
Clear all

E682 and pixel strip???

8 Posts
4 Users
0 Reactions
2,748 Views
Posts: 49
Topic starter
(@christopher2113)
Trusted Member
Joined: 16 years ago
[#25529]

I was wanting to use pixel strip to decorate the post on my porch...
I am wanting to control every pixel or every three pixels which ever
I was looking at some strip on eBay but I'm wondering if they can be controlled by the e68x devices
Also is there a single controller that can be used to drive just each strip because the post are several feet away from another I'm talking about 10' or so
I do have cat5e to run to hook up e1.31 so that's no problem

Which is the best strip for my project and the best for my money and they also must be waterproof

Also I was looking at building a matrix with the strip as well I do know I would want to control each pixel

Any info or suggestions would be pretty helpful

Thanks


7 Replies
Posts: 122
(@robertc)
Estimable Member
Joined: 14 years ago
Christopher2113 wrote:I was wanting to use pixel strip to decorate the post on my porch...
I am wanting to control every pixel or every three pixels which ever
I was looking at some strip on eBay but I'm wondering if they can be controlled by the e68x devices
Also is there a single controller that can be used to drive just each strip because the post are several feet away from another I'm talking about 10' or so
I do have cat5e to run to hook up e1.31 so that's no problem

Which is the best strip for my project and the best for my money and they also must be waterproof

Also I was looking at building a matrix with the strip as well I do know I would want to control each pixel

Any info or suggestions would be pretty helpful

Thanks

It all depends what IC the strips are using. The e68x should have a data sheet, letting you know what IC it supports. Found here, http://www.sandevices.com/

Check out LEDexpress or holidaycoro, or ray wu, for strips also. The eBay ones seem expensive.

If your worried about distance and your strip, just run a null pixel in between strips.

I'm using ws2811, and J1sys P2, this year. I've been happy with my testing, so far.


Reply
KenL
Posts: 21
 KenL
(@kenl)
Eminent Member
Joined: 17 years ago

If you want pixel strips I use these - I have 24 of them in a matix.

http://www.aliexpress.com/store/product/5m-WS2811-LED-digital-strip-60leds-m-with-30pcs-WS2811-built-in-the-5050-smd-rgb/701799_653641294.html

Do you really need Pixels? My porch I have dumb rgb strip that I use like spot light to light up the porch.

What software are you planning on using to control your matix and rgbs?


Reply
Posts: 49
Topic starter
(@christopher2113)
Trusted Member
Joined: 16 years ago
KenL wrote:If you want pixel strips I use these - I have 24 of them in a matix.

http://www.aliexpress.com/store/product/5m-WS2811-LED-digital-strip-60leds-m-with-30pcs-WS2811-built-in-the-5050-smd-rgb/701799_653641294.html

Do you really need Pixels? My porch I have dumb rgb strip that I use like spot light to light up the porch.

What software are you planning on using to control your matix and rgbs?

I want the pixel strip to go on my post to act or look like the light poles or fire poles

I like the strip you suggested and also this one
http://www.aliexpress.com/store/product/4m-WS2811-LED-digital-strip-60leds-m-with-60pcs-WS2811-built-in-the-5050-smd-rgb/701799_638374848.html

I haven't decided if I want to use pixels or strip for the matrix
And I may have to put this on the back burner due to low funds

As for the software

I am currently using LOR but was looking at Madrix which is pretty price but good
And LSP
I also know about the nutcracker program


Reply
Posts: 49
Page 1 / 2
Share: