Notifications
Clear all

E6804 or E682

11 Posts
7 Users
0 Reactions
3,310 Views
Posts: 911
(@madsci1016)
Noble Member
Joined: 12 years ago

Don't forget to consider the e1.31 bridge with pixel extenders. You won't need to worry about signal issues or null pixels if you go that route. http://www.diyledexpress.com/index.php?main_page=index&cPath=22


Reply
Posts: 437
(@masterful)
Honorable Member
Joined: 13 years ago

Just a question. Can I use an e6804 as a data line only with out using the power side as I have 5 and 12v pixels ?


Reply
Posts: 911
(@madsci1016)
Noble Member
Joined: 12 years ago

Yes, but you need to make sure GNDs are connected between your external power supply and your pixel controller.

Sent from my Nexus 5X using Tapatalk


Reply
Posts: 437
(@masterful)
Honorable Member
Joined: 13 years ago
madsci1016 wrote:Yes, but you need to make sure GNDs are connected between your external power supply and your pixel controller.

Sent from my Nexus 5X using Tapatalk

Thanks for that. Helps a lot in me choosing which to buy early in the new year.


Reply
kwoodard
Posts: 281
Topic starter
(@kwoodard)
Reputable Member
Joined: 13 years ago

After reading about the ESPixelStick, you can do the same thing -- use the ESPixelStick to drive the data lines for up to four universes while using your external power supply to drive power to lines. For stand-alone elements like mega trees, this might be a good option.


Reply
Page 2 / 3
Share: