Notifications
Clear all

E6804 or E682

11 Posts
7 Users
0 Reactions
3,309 Views
kwoodard
Posts: 281
Topic starter
(@kwoodard)
Reputable Member
Joined: 13 years ago
[#40124]

Next year I plan on adding 2 new mid-size pixel trees to my show. Each tree will be 8' tall, 180 deg, 16 strands. Each strand will be between 25-30 12V pixels per string depending upon whether I decide upon 3" or 4" spacing. The two trees will be placed about 40' from each other. Now I need to decide upon the best controller. I'm currently using two E6804 controllers in my show, but I see E682s are very popular.

From my experience with incandescent strings, I've learned it is best to have multiple small controllers near each element. For that reason, I think it would be best to use E6804 controllers for these trees. If I go with the E6804, I would have 4 connections, each of 100 pixels (4 strings of 25, zig-zag arrangement). The downside is that there will be no room for expansion if I decide to make changes in the future. The upside is that the E6804s are cheaper ($80 cheaper for 2 controllers -- that's $80 of my budget that I can spend elsewhere) and they are easier to assemble.

What else should I be considering? Any recommendations?


10 Replies
Posts: 317
(@spyder)
Reputable Member
Joined: 11 years ago

Although the E6804 has the same capacity it is hampered by its output. You could always run 200 or 300+ pixels on each output but have more injection work to carry out. How high you could really go on each output before introducing issues I don't know for sure but you could be fine pushing 3 universes per output so you could have an output or two left on each controller for future expansion.

I would probably opt for the E682 for the rest of the show and use the small ones at your trees.


Reply
Steven010
Posts: 416
(@steven010)
Honorable Member
Joined: 18 years ago

Although i do not have schematics, it appears there are no buffers or resistor packs on e6804. I have personally had issues with 6804 talking on network. I am not a fan, buy 682.


Reply
Posts: 339
(@heldwhat-christmas)
Reputable Member
Joined: 15 years ago

What type of pixels are you using? I had intended to use my 6804 for my pixel tree this year, but it died on me so last minute I substituted the ESPixelStick. It's super cheap, and worked like a champ for me, but it's certainly more limited in terms of supported pixels (2811, 2812, and GECE) and quantity of pixels (max 4 universes in unicast), just depends on what you are doing.


Reply
kwoodard
Posts: 281
Topic starter
(@kwoodard)
Reputable Member
Joined: 13 years ago

I'm using 12v WS2811 bullet pixels. I've read a little bit about the ESPixelStick and would like to get my hands on a few of them. I missed the original group buy. Maybe there will be another one soon.


Reply
Page 1 / 3
Share: