Diffused Peace / Pi...
 
Notifications
Clear all

Diffused Peace / Pixel Stake

10 Posts
5 Users
0 Reactions
2,169 Views
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago
[#55492]

I wanted to add Peace / Pixel Stakes to my display next year and I really like the diffused look in general. I was wondering if anyone has diffused their stakes and if so can you share what you used and any videos if possible?

I did a test of 5 pixels zip tied to a 1/4" stainless rod slipped inside both 1" PEX and 1-1/2" PVC but neither were exactly what I was looking for. I think the PEX might work best but I would need to adjust my pixel spacing as they were too far apart and you lost some of the "neon tube" diffused look. They were about 4" apart as I used the pixel wire to help determine the spacing. My problem there is that if I bring them closer to each other it might not fit inside the 1" PEX properly or the wires might block the pixels.

Thanks in advance,
-Russ


9 Replies
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

What about LED strip instead of bullets inside the PEX?


Reply
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago

Hmm yea that would work as well. But at 5 nodes each x 48 for my yard I think that would be harder to waterproof each connection no?

I have LED strips in my Arches and do like that look though.


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

IMO, strips would work better for the look you want. You could place a cap over the top of the PEX........


Reply
Posts: 32
(@marksat)
Trusted Member
Joined: 8 years ago

I am fiddling with these "bulb" type caps (got a 3d printer for Christmas):

PixelSpheres

https://www.thingiverse.com/thing:4709546

Also, there is a pixel stake model that looks interesting (haven't tried it):

PixelStake

https://www.thingiverse.com/thing:4725615


Reply
Page 1 / 2
Share: