Controller and Reci...
 
Notifications
Clear all

Controller and Reciever question

4 Posts
4 Users
0 Reactions
1,500 Views
Posts: 10
Topic starter
(@kalcorn)
Active Member
Joined: 5 years ago
[#56660]

I thought I had my controller and recievers nailed down as what I wanted. My plan has been the Falcon F16V4 controller and the 4 string smart recievers. I already purchased a couple of recievers since they were in stock and the controller isn't. Now, I have been looking at the Kulp K16A-B Beaglebone controllers even though they aren't in stock either now. My question is if I went with the K16 Beaglebone can I still use my Falcon 4 string smart receivers with it?

Kevin


3 Replies
Posts: 242
(@rsegreto)
Reputable Member
Joined: 6 years ago

The Kulp will run the Falcon because it?s FPP based. To run the falcon one you will need something like a raspberry Pi with FPP.

I say go kulp. I have a K8 running 5 smart receivers with lots of headspace still.

Double check the smart receivers, I know there are Beaglebone specific ones but don?t know if there is really a difference. They look identical in the pictures but could be something behind the scenes.

Sent from my iPhone using Tapatalk


Reply
critic2
Posts: 1389
(@critic2)
Noble Member
Joined: 17 years ago

If vendors are out of stock, Check the Buy/Sell/Trade sub forum.
Other members are selling stuff some of the time 😉
(Selfless plug)


Reply
ChiefWarrant
Posts: 570
(@chiefwarrant)
Honorable Member
Joined: 19 years ago
Kalcorn wrote: My question is if I went with the K16 Beaglebone can I still use my Falcon 4 string smart receivers with it?

Kevin,

I ran some old Falcon receivers on the Experience Lights Long Range Pixel Controller this year. If I remember correctly, the new Falcon Smart Receivers work on the Genius boards, but must be ran in "dumb" mode.

-Tony


Reply
Share: