connecting to multi...
 
Notifications
Clear all

connecting to multiple props

2 Posts
2 Users
0 Reactions
1,422 Views
JasonPortwood
Posts: 753
Topic starter
(@jasonportwood)
Noble Member
Joined: 17 years ago
[#32924]

I was wondering like with the coro candy canes, mini trees or other props what is the best way to connect one item to the next? I have a prop I want to build that only will have 12 pixels in each and then connect to another one for a total of 4 and about 6' from each other. As those distances I'll need null pixels and power injection I'm sure.

I'm just wondering how are people connecting something like this all together? Thinking of how to make it easy and not a real mess of cables to hook up.

Thank you,

Jason


1 Reply
Posts: 2229
(@plasmadrive)
Famed Member
Joined: 15 years ago

Last year I bought a bunch of Ray's 4 core cables with the waterproof connectors. I have been using them for a lot of stuff. I just used them on my Pixel Mini Trees and they work fine, (I have 24v feeding converters on every 55 pixel count tree) You will get voltage drop because they are light gauge wire. He has black ones that are heavier gauge and those could work nicely for you. I usually but them so that I have a long "goes inna" side and a short "goes outa" side.

As for power injection, if you don't cheap out on wire size (trying to use Cat5) you should be fine injecting power at the beginning and the middle I would think. Or you could inject at the end instead. You only have about 48 pixels so that is only about 2.5-3 amps. In the scheme of things the current draw is pretty low.

I don't think you will need any null pixels either. 6' is no big deal for the WS2811 data.


Reply
Share: