CG-1500 double deck...
 
Notifications
Clear all

CG-1500 double decker

64 Posts
9 Users
0 Reactions
26.4 K Views
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
[#52117]

Has anyone built or tried this I ran across it on jdeations and looked interesting ?

Sent from my iPhone using Tapatalk


63 Replies
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago

Sent from my iPhone using Tapatalk


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

Stacking such as this is common now with the larger boxes. We build our own, but the pre-made and kits work well.
Keeping in mind things such as air flow and maintenance, you can get a lot into some of them.


Reply
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
algerdes wrote:Stacking such as this is common now with the larger boxes. We build our own, but the pre-made and kits work well.
Keeping in mind things such as air flow and maintenance, you can get a lot into some of them.

Will look into it thanks

Sent from my iPhone using Tapatalk


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
wilmar wrote:Has anyone built or tried this I ran across it on jdeations and looked interesting ?

Sent from my iPhone using Tapatalk

That setup will not fit inside a CG1500. It may fit inside a BUD box.

Sent from my SM-T710 using Tapatalk


Reply
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
pmiller wrote:That setup will not fit inside a CG1500. It may fit inside a BUD box.

Sent from my SM-T710 using Tapatalk

Yes he has 7 diff ones with diff boxes I posted wrong pic

Sent from my iPhone using Tapatalk


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

I bought 3 sets of the CG-1500 double-decker plates from him this past year. It made putting an E682 and two 12V PSUs into one box very easy and greatly helped with keeping the wires neat and tidy. Well worth the expense.


Reply
Posts: 100
(@little-b)
Estimable Member
Joined: 9 years ago

I've created a few designs through his program to stack some of my controllers. It works pretty great. The power supplies he shows are thinner than mine, so I haven't tried stacking those. I use other size boxes as well and have found I really like the power supply mounting brackets. Makes it much easier to pull them in and out when I need to.


Reply
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago
Little_b wrote:I've created a few designs through his program to stack some of my controllers. It works pretty great. The power supplies he shows are thinner than mine, so I haven't tried stacking those. I use other size boxes as well and have found I really like the power supply mounting brackets. Makes it much easier to pull them in and out when I need to.

Thanks for the info will be looking into this as I grow I’m sure

Sent from my iPhone using Tapatalk


Reply
wilmar
Posts: 2115
Topic starter
(@wilmar)
Noble Member
Joined: 8 years ago

I’d like to find a step file for the CG-1500 if it’s out there anywhere.

Sent from my iPhone using Tapatalk


Reply
Page 1 / 7
Share: