I'm ordering from Todd just went to checkout and not sure about wire color. Is the multi the most popular option for mega trees and such?
Dkelly0802 wrote:Thanks everyone for all the great input. I'm beginning to realize I'll never have enough pixels but need to keep within my budget. Wolfie thanks for all the great ideas and your input. There are so many things I don't even think of that you bring to LIGHT.
Haha! I see what you did there 🙂
Dkelly0802 wrote:I'm ordering from Todd just went to checkout and not sure about wire color. Is the multi the most popular option for mega trees and such?
Wire color is nothing more than cosmetic. It makes no difference in the grand scheme other than daylight camouflage.
That said, for a new person starting, I would recommend you stick with multicolor. Its harder to make a mistake soldering and hooking things up. Once you make the initial identification of red is V+, white is data and blue is GND, then life is good. If you choose one of the monaural color options (black, white, green, whatever), its easier to make mistakes wiring stuff up as they all are the same color. I tend to be OCD and very detail oriented so I had no issues working with black wire pixels and the wires disappear behind my black boscoyo strips. And, to be frank, thats the only affect of wire color choice.
You can always make multicolor wire any color you want with spray paint. I only had multicolor pixels for my spider web. So I designed and printed a couple hundred pixel caps.

http://www.thingiverse.com/thing:1728214
Yes, you can use blue tape to cover the LED. But its time consuming to tape on and time consuming to take off after you paint it. These are reusable and fit both bullet and square pixels. Fast to put on and fast to take off. Once placed over the LED you can spray paint everything including the pixel body whatever color you desire it to be. In the case of my spider web, I loaded up the pixels into 1/2" hardware cloth from Menards, covered them with these, and spray painted the whole shooting match with flat black. Couple coats and then popped these off and stored in a bag for later use.
Thanks again for another BRIGHT idea.
Sent from my iPhone using Tapatalk
Wire color is not noticeable during a show and even if it was slightly noticeable, the viewers are not looking at your wires. I prefer the multi color just to make it easier to not screw up when building things (which I have done anyway). LOL
