I started buying pixels in early 2013 and part of me feels like it depends on the type of pixels you buy. I'm not talking about the vendor, I am talking about, let's say, square pixels having higher failure rate for me compared to bullet style pixels. For instance, one of the first things I put pixels into back in 2013 were my white, metal, twig/stick trees. They each have 200 bullet style pixels (5V along with pretty much everything else in my display) and there are ten of them. To THIS day, I have yet to have a single pixel fail out of those 2,000. Now, my megatree and tall fan palm trees use flat back square pixels and I swear I have to replace at least one out of every five strings every year for a failed pixels (I end up fixing them and re-using them, but still, the twig tree lights just haven't failed, not even one). All of my pixels come from Ray Wu and he is good about sending replacements, but I still over-order by around 10% for every new thing I build. I have purchased over 20,000 pixels from Ray.
-Louie
No doubt I'll want more but already feeling I'm biting off more than I can chew. Thanks for all the info. I can't wait to dig in.
I have been running about 10k pixels running for 2+ years and have had only two go bad.
Buy at least one string to match the originals to cover failures. Buy even more if you can, because once you get started you will be glad you had a couple hundred extra to try out some new things. Funny thing is I buy extras, and the next year I still need more. Often times I have even made two or more buys in a year. Maybe it's bad planning, but as I read the forums and watch videos I always get ideas that look to be fun to try. I've never regretted having extra pixels available. Sometimes those extra projects do not make this seasons show, but there is always next year. Damn addiction.
Dkelly0802 wrote:Hey guys I am wondering how many extra pixels to buy. I am getting my order together and figure I need 1310 pixels. My question is how many extra pixels do you order to cover failure and so on? Are there wasted pixels when building a megatree and more importantly when outlining a house. Thanks for the help.
Waste, in the true sense of the term, no. Not practical to use is a different issue though.
Depending on how you make what you make, you may or may not have extra pixels. I made my megatree 24x60. As you can see, 24x60 is not divisible by 50. I cut 50px stings to 10px pieces and soldered them on the end of 24 50px strings to make 60px. So I had some left over. Those go in the spares bin.
I made two extra 60px strings and mounted to extra boscoyo strips. One going up. One going down. If I get a failure, I simply replace the entire strip and get the tree back in operation quickly. And I will repair the bad one inside where its nice and it will become the backup. Thats what those leftovers get saved for.
I also have pixels for the web, the singing faces, both different. I set aside one 50px of each type of those for use as repair material. I am not expecting more than 50 failures across those in the lifespan of the prop. If I do, I am more likely to replace all the pixels because thats an unacceptable failure rate.
I have more spools of 30/10 strip for repairs. I allotted 1 extra spool for two window frames, 1 extra spool per two arches. Again, for repair, I will replace a whole section (not just single note) and then micro-repair the pulled pieces later.
Now as for leftovers, yea, likely you will have small quantities of odd pixels from construction. However, is it practical to solder 1 or 2 pixels at a time together to form strings for normal construction? For me, no. Not worth it. I am not going to take a scrap bin of 1-5 pixel chunks and solder them together to use for a 150px prop. The money spent on splicing (solder, heatshrink, butt connectors, etc) and the time involved simply makes it impractical. Can you? Yes. Should you? No. It not only would take forever to build a prop, but every solder joint is a potential problem child later. The fewer connections the better. Every connection is a weak point. I would rather pitch a 25c pixel than add 6 more solder connections (3 in front and 3 in back) to a prop. I am not talking repair here. I WILL use one to repair a single pixel failed in an already constructed prop.
The bin of spares is just that. Spares. I use some upstairs in the computer room connected to a controller to test actual colors when sequencing. The rest I consider scraps and used only for repairs. General construction is done using full or mostly full strings to start out with.
I do have the leftovers in bags with what prop they came from. Thats so I can use the same batch of pixels to repair the specific prop so I won't have mis-matched colors.
