Getting ready to place my first order with Ray and I'm looking at the different pixels. I'm looking at ordering bullet style, 12v, 18AWG ws2811's. I have a falcon controller if that makes any difference.
These appear to be the same pixels only 1 has pigtails attached and the other doesn't. Both are listed as ws2811, IP68, 18AWG black wire. Both priced the same at $25.00. I've noticed on others that the ones with pigtails are usually a buck or 2 higher. Any reason why the ones with pigtails are the same price as the ones without? Is there some difference I'm not seeing?
Thanks.
Better price on these ones. Those are the same, but i know for me i dont like the pigtails that come attached.
jerry72 wrote:Better price on these ones. Those are the same, but i know for me i dont like the pigtails that come attached.
These are not good - only 20 gauge wire - go with your 18 gauge
I'm going to stick with the 18 awg since the difference in $ is minimal. I'm wondering why the price is the same with or without the pig tails. Usually it's $1.50 more or so with the pigtails so I'm wondering if there's something off on these or some difference between the 2 that I don't see.
tgodfrey wrote:I'm going to stick with the 18 awg since the difference in $ is minimal. I'm wondering why the price is the same with or without the pig tails. Usually it's $1.50 more or so with the pigtails so I'm wondering if there's something off on these or some difference between the 2 that I don't see.
Not sure there needs to be a cost add for connectors/pigtails. If you are doing a million piece run for a customer with pigtails, it is less expensive to run more than change to no pigtails, or cut them off
