Ammo box PSU setup
 
Notifications
Clear all

Ammo box PSU setup

8 Posts
6 Users
0 Reactions
3,071 Views
Posts: 825
 DanJ
Topic starter
(@danj)
Prominent Member
Joined: 13 years ago
[#42969]

Here's how I put some PSUs into some small ammo boxes I got from WalMart. I am using cat5 for power (using all 8 leads) and the little board on top of the PSU is the distro board sold here earlier this year. I am he one who asked if anyone had ever tried to put 2 PSUs into an ammo box. It's pretty obvious from the phot that putting two PSUs into one of these would not work, based on wiring to/from the PSUs... These will be used for power injection in several areas of my display this year. I put together four of these.

Ammo Box Pic 3
Ammo Box Pic 2
Ammo Box Pic 1

7 Replies
Deacon
Posts: 151
(@deacon)
Estimable Member
Joined: 13 years ago

Good idea, I like it! Very portable.


Reply
Posts: 825
 DanJ
Topic starter
(@danj)
Prominent Member
Joined: 13 years ago

Thanks Deacon. Not my original idea; lots of people use ammo boxes, tool boxes, etc... I do like these boxes; they have handles on top like a small tackle box. Really handy. Will see just how waterproof they are this season!!


Reply
Posts: 485
(@jerry-rigs)
Honorable Member
Joined: 11 years ago

I bought a bunch of the Harbor Freight ammo boxes with the intent of doing what you've done.

I ask to gain knowledge, not to criticize.

Are the PSUs "mounted" in any way? I am considering mounting to the wall of the box thru a spot of silicone (after attaching wires).
I like the glands for strain relief and weather resistance.
Why did you use an EMT (not sure that's the correct term) clamp for the AC power input? It doesn't seem to be weather-proofed in any way and I think another gland would do the trick.
How is the fuse/distro block mounted?

You design looks uncomplicated and functional (those are good things). It also leaves you the option of mounting vents on the side opposite the PSU, perhaps the "bud industries" ones with even a (perhaps difficult to mount) fan if desired.


Reply
Posts: 36
(@psalmx)
Eminent Member
Joined: 11 years ago

I setup a harbor freight ammo box with a PSU and an espixelstick to run my arches. Only draw back is it looks like a bomb in my front yard. Thinking some paint to make it look like a present.


Reply
Page 1 / 2
Share: