P. Short wrote:Xmus,Have you looked at the output with a scope? What I saw today came as a complete surprise to me. Even the 57600 output was a touch high, at 59000 or so, and loading the official Belkin drivers didn't help any.
Anyway, here is the latest firmware. It is set up for 57600, non-PWM usage.
--Phil
Yes I have looked several times, with a scope, that is very surprising!
Excellent, so is this the FW you would like us to configure for 115.2K and test out?
Thanks Phil!
Yes, it's the same as what I sent you earlier, with just that one typo removed.
--
Phil
I tested:
;; PWM_build can be either 0 or 1
#define PWM_build 1
;; DC_build can be either 0 or 1 (it should be 0 if PWM_build is 0)
#define DC_build 0
#define CLOCKRATE 18432000
#define BAUDRATE 115200
No good on the highest baud rate. I set Vixen for 115200 N 8 1.
I also tested with the default. That worked as far as I can tell the same as before, except the feature to turn off the channels before Vixen sequence works well! Nice touch.
ms
well I'm going to give this a try now. If i understand you Matt, I shouldn't expect this to work at 115.2KBPS?
UPDATE
I changed only the line for baud rate (kept default, ext_osc and not DC build and not PWM)
#define BAUDRATE 115200
No flashy blinky.
Are you using a USB-RS232 converter, or a built-in PC serial port? I had problems with the former (baud rate was off), it seemed to work OK with the built-in port.
--
Phil
P. Short wrote:Are you using a USB-RS232 converter, or a built-in PC serial port? I had problems with the former (baud rate was off), it seemed to work OK with the built-in port.--
Phil
I was using the built in serial port and a 485 converter. And i only tested the first 16 ch.
Is there anything else I can try to get up to the highest baud rate? At this point I am thinking that my computer isn't driving the port at the rate Vixen wants.
ms
stempile wrote:Is there anything else I can try to get up to the highest baud rate? At this point I am thinking that my computer isn't driving the port at the rate Vixen wants.ms
I guess....we'd have to find something else that works at 115,2 to prove that the serial port works (thinking....)
xmus wrote:Are you using a USB-RS232 converter, or a built-in PC serial port? I had problems with the former (baud rate was off), it seemed to work OK with the built-in port.--
Phil
I was using the built in serial port and a 485 converter. And i only tested the first 16 ch.
Anything show up with the diagnostics?
--
Phil
I think you are suggesting I use the ext_osc diag code and configure it for 115.2K? I could do that....
