Quick Question
 
Notifications
Clear all

Quick Question

10 Posts
5 Users
0 Reactions
3,921 Views
Posts: 49
Topic starter
(@flintman)
Trusted Member
Joined: 19 years ago
[#22063]

I have 2 renard 24ss's. One of them i had built last year and is running Renard-20071229.asm on the pics. The question i have is from what i can tell you can't address with the asm file. First question is do i have to upgrade to Renard-20090915.asm firmware in order to make these both work and have 48 channels? Or can i just load the 20071229 firmware on the second one and I will have all 48 channels working? The last question is can i load the new one with 20090915 firmware and the old one with 20071229 firmware and set the start channels with the new one?

Pre thanks


9 Replies
macebobo
Posts: 1595
Guest
(@macebobo)
Member
Joined: 17 years ago

If they are wired together, you will be fine since you don't need to set a start channel. If they are wireless, you will need the 2009 firmware to set the start channel on the second controller.

-- John


Reply
Posts: 49
Topic starter
(@flintman)
Trusted Member
Joined: 19 years ago

So since i have a com cable running to the first one and then a lan cable to the next one the first channel will be 25 on the second board. running the 2007 firmware. I just want to make sure this is correct.

Thanks


Reply
macebobo
Posts: 1595
Guest
(@macebobo)
Member
Joined: 17 years ago

That is correct.


Reply
Posts: 49
Topic starter
(@flintman)
Trusted Member
Joined: 19 years ago

Thank you again


Reply
Page 1 / 2
Share: