I guess I will go with this one since everyone talks highly about it. Is this all I will need to program my renard pics http://cgi.ebay.com/PIC-PICKit-2-PICkit2-Development-Tool-Programmer-Kit_W0QQitemZ290261983288QQcmdZViewItem?hash=item290261983288&_trkparms=72%3A1205%7C39%3A1%7C66%3A2%7C65%3A12%7C240%3A1318&_trksid=p3286.c0.m14
It includes a ZIF(Zero Insertion Force) socket.
Joel
If I am brand new to programming, will this one be easy to figure out?
Sloanhaus wrote:If I am brand new to programming, will this one be easy to figure out?
Either of those will work and you will have your first pic programed in less than 2 hours. Just follow the instructions and do the program lessons that come on the software.
Yes and no. Yes, this programmer will program the PICs. The problem is you don't have a socket to hold the PIC. The ICSP-2 header on this board can be wired to a socket to do the programming with 5 wires. I purchased a ZIF (zero insertion force) board like this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=130209875198
If you don't get a board like this, you need to get the schematic for your chip (app notes) from Microchip (see page 4 of the 16F688 notes) and wire up
VPP to Pin 4 (VPP)
VDD to Pin 1 (VDD)
GND to Pin 14 (VSS)
PGC to Pin 12 (ICSPCLK)
PGD to Pin 13 (ICSPDAT)
Hope this helps. Oh, and if you buy the board, you have to install five (supplied) jumpers on the board to make the connections from the ICSP headers to the ZIF socket headers.
Andy
