HELP!!!! Newbie ha...
 
Notifications
Clear all

HELP!!!! Newbie having problems

5 Posts
3 Users
0 Reactions
3,583 Views
Posts: 94
Topic starter
(@wdmountaindad)
Estimable Member
Joined: 13 years ago
[#34127]

I have 5 XMUS 16's programmed the PIC's with new firmware and am running Vixen 3. I have a lot of LED strings that don't seem to be working, all of my standard strings are working. How do I change the PIC's firmware to the PWM to work with my LED's. Thanks


4 Replies
Posts: 195
(@tommy)
Estimable Member
Joined: 19 years ago

Go to the wiki and download the PWM firmware for your board. That will eliminate it being a firmware problem. Once you have the PWM firmware downloaded, you'll need a pic programmer to load the firmware onto the pics. You'll find videos on how to reprogram the chips on the wiki.


Reply
Posts: 94
Topic starter
(@wdmountaindad)
Estimable Member
Joined: 13 years ago

I have already downloaded and programed PIC's to new firmware but, the wiki stated that I needed to change something for PWM or am I mistaken?


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Edit the .asm file and you will see an option to turn on PWM - it is off by default. Recompile and reflash.


Reply
Posts: 94
Topic starter
(@wdmountaindad)
Estimable Member
Joined: 13 years ago

Thanks....


Reply
Share: