DMX code for renard...
 
Notifications
Clear all

DMX code for renard???

33 Posts
12 Users
0 Reactions
22.8 K Views
jrock64
Posts: 1099
(@jrock64)
Noble Member
Joined: 19 years ago

I have something something in mind for this year and I want to build a lot of them, so I am looking for the simplest design possible.

Phil, is it possible to tweak the Renard DMX code to use the internal clock so the oscillator can be omitted.
Unless its already in there and I missed it.

Just asking, if it can not I will just have to include the part.

JOel


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

The code was designed for operation at 16 MHz (i.e. using the internal oscillator). The timing is very tight, though, to the point where adding one extra instruction at certain critical places would put it over the limit.


Reply
Posts: 859
(@smartalec)
Prominent Member
Joined: 17 years ago
tconley wrote:you can always use RJ's REnard splitter.

http://diylightanimation.com/index.php?board=24.0

i found this as a DMX splitter
http://users.skynet.be/kristofnys/files/booster/dmxbooster.pdf
i dont know if its the same one from RJ's or not, as i couldn't find his schematic anyware


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago
smartalec wrote:i found this as a DMX splitter
http://users.skynet.be/kristofnys/files/booster/dmxbooster.pdf
i dont know if its the same one from RJ's or not, as i couldn't find his schematic anyware

We have one of those as our very own. Check this One
I use two of them in my display, operation was faultless. I don't have very long cable runs nor a lot of devices in one chain.


Reply
Posts: 859
(@smartalec)
Prominent Member
Joined: 17 years ago

that looks sweet, do you know if boards are still floating around for sale an how much?

Matt_Edwards wrote:We have one of those as our very own. Check this One
I use two of them in my display, operation was faultless. I don't have very long cable runs nor a lot of devices in one chain.

Reply
Page 6 / 7
Share: