Linux PCB software
 
Notifications
Clear all

Linux PCB software

12 Posts
7 Users
0 Reactions
18.6 K Views
Posts: 101
 Zane
Topic starter
(@zane)
Estimable Member
Joined: 19 years ago
[#2305]

I just wanna know some of the good names for Linux.

I recently migrated and have nothing to go by.

The only one that i have found is PCB and that one has a very steep learning curve.

If only ExpressPCB was on linux :confused:


11 Replies
Posts: 101
 Zane
Topic starter
(@zane)
Estimable Member
Joined: 19 years ago

I feel like an idiot...

I figured out how to use ExpressPCB on Ubuntu (the linux i run)

first run the following code to install WINE windows emulator in the counsole

sudo apt-get install wine

the download expressPCB and open the exe with wine

will install just like windows and run in the windows environment


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago

Try kicad, it runs native under windows and linux


Reply
Posts: 93
(@petefats)
Estimable Member
Joined: 19 years ago

my favorite so far is pcb


Reply
Posts: 101
 Zane
Topic starter
(@zane)
Estimable Member
Joined: 19 years ago

I tried KiCAD....still not as easy as ExpressPCB
but more functional


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago
Zane wrote:I tried KiCAD....still not as easy as ExpressPCB
but more functional

easy and functional often don't go together.


Reply
Posts: 101
 Zane
Topic starter
(@zane)
Estimable Member
Joined: 19 years ago
mrpackethead wrote:easy and functional often don't go together.

yea, but functional shouldn't come with difficult to learn 🙂

When i can, im going to test a bunch of different PCB programs that have free demos with WINE and list the ones that work, work to a degree, and ones that i cannot install directly from Linux.

What differen't ones are there. I know of PCB123 or something like that and Eagle CAD. what are some more that i can test?


Reply
A Marchini
Posts: 426
(@a-marchini)
Reputable Member
Joined: 19 years ago
Zane wrote:yea, but functional shouldn't come with difficult to learn 🙂

When i can, im going to test a bunch of different PCB programs that have free demos with WINE and list the ones that work, work to a degree, and ones that i cannot install directly from Linux.

What differen't ones are there. I know of PCB123 or something like that and Eagle CAD. what are some more that i can test?

gEDA might be worth the time. http://www.geda.seul.org/

Tony M.


Reply
Posts: 447
(@blackbeard)
Honorable Member
Joined: 18 years ago

Very, very late on this one, but I just joined a few days ago.

I have been using Eagle design software. They have a free version that is only limited in size of the board you can work with and it only allows 2 layers, front and back. The next version up, which just removes the size and layer limits, used to be $49. They have quite a few libraries, you can make your own, it produces Gerber files, configurable auto-routing, and there is a version for both Windows and Linux. The files that it uses and produces are used by either version, so you can work on Windows, sync the files to your Linux box, and start right in.

Google for CadSoft or Eagle Cad. There is a german site and a USA site, so depending on which language you prefer....

The Linux version is suppled with RPMs also. The lite version is totally free - no trial or expiring on the program at all. They are a real first class company.


Reply
Posts: 28
(@steve)
Eminent Member
Joined: 19 years ago

Personally, I use gschem for schematic capture and pcb for the board layout. The learning curve (although it's not THAT bad IMHO) was worth it. pcb is a nice little tool. I've used it successfully for several projects (SSR controller, SSR relay boards, a Pinewood Derby timer, and a bunch of other misc. things) which I etched and drilled at home, and some I sent to a couple of different fabs, neither of which had any trouble using the pcb output files.


Reply
Page 1 / 2
Share: