Board Dimensions?
 
Notifications
Clear all

Board Dimensions?

21 Posts
6 Users
0 Reactions
28.7 K Views
Posts: 1168
Topic starter
(@keith-r)
Noble Member
Joined: 19 years ago

Thanks Craig! I have been on here for almost 15 years and it never ceases to amaze me the help all of you provide. That's why Ive stayed a supporting member all of these years.
Thanks,
Keith


Reply
Posts: 1168
Topic starter
(@keith-r)
Noble Member
Joined: 19 years ago
P. Short wrote: It looks fine there, being a 1.46" x 1.11" design with traces on the bottom-side only.

I am still having an issue with the board size. Are these the correct dimensions? The site needs board dimensions.

Thanks

So I manually put in the dimensions I measured on Eagle. I appreciate everyone's help on this.


Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago

I uploaded it to JLPCB and it took the zip file where it says "Add gerber file" but still didn't give dimensions...

BTW, they quote $2.00 for 5 boards but the shipping is $3.50 and way, way up.

If you have Eagle, click tools then statistics, it says it's 37.25mm x 28.25mm max board length.

-Craig


Reply
Posts: 1168
Topic starter
(@keith-r)
Noble Member
Joined: 19 years ago

Thanks. I downloaded Eagle and followed the tutorial to process the file and checked the Gerber files with PCBway online Gerber viewer. I tried it twice and could not get the Gerber files to load properly. Yours loaded just fine. I checked the dimensions manually in Eagle and came up with 36.942 x 28.075. That's what I went with and I think it will be OK. I am surprised that the dimensions don't automatically load. I didn't know about the statistics for Max board length. All of this is a learning process for me as I now have time to work on projects and am working way out of my comfort zone. Thanks for your help.
Keith


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

There is something hokey about the first set gerber files that were bandied about (their gerber viewer said that it couldn't find an outline layer), perhaps they are in a slightly older format that jlcpcb has trouble with. Their review process seems to be fairly good, and you would likely get an email from them if something needs fixing. Hopefully not.

Good luck with this.


Reply
Page 3 / 5
Share: