Notifications
Clear all

???

14 Posts
4 Users
0 Reactions
5,003 Views
Posts: 94
Topic starter
(@diyermaker)
Estimable Member
Joined: 6 years ago
[#55407]

I have dumb pixels and I attached two pairs together with the 3 wires going to a ssr relay. With nothing connected the leds stay on after the relay has been completely shut off. Only when I shut off the LED power supply the LEDs shut off. Could this be the capacitors bouncing energy back and forth? I would show a schematic but it won’t let me import anything.


13 Replies
Posts: 94
Topic starter
(@diyermaker)
Estimable Member
Joined: 6 years ago

I will let the leds sit and see if they fade off


Reply
Posts: 409
(@dim-bulb)
Reputable Member
Joined: 9 years ago

What kind of relay? I stull use a little bit of dumb nodes, the lights will have constand power to them and how they get turned on is the ground is activated through a mosfett, if that mosfett goes bad, it will not shut of and will keep the led lite.


Reply
Posts: 94
Topic starter
(@diyermaker)
Estimable Member
Joined: 6 years ago

Ssr from sainsmart


Reply
Posts: 409
(@dim-bulb)
Reputable Member
Joined: 9 years ago
Diyermaker wrote:Ssr from sainsmart

my guess is its a bad mosfett


Reply
Page 1 / 3
Share: