Has anyone got any thoughts on how to do a show player via SD memory cards?
Maybe a plug in unit before our boards that would run the shows without a pc. Wouldn't need to be the power supply just something to run the show
Kev
something like this for vixen
http://store.lightorama.com/dicawimp3pl.html
There has been idle discussion about this in the past, but I don't think anyone has come up with a working design yet.
I was thinking about this a little bit awhile back...
What if you had a PIC and mp3 player circuit (STA013) on a board together, along with a card reader and a clock for scheduling? The data to send to the controller could be stored in an ID3 tag, as the STA013 just ignores any non-mp3 data it gets. The PIC could feed the data through to the MP3 while simultaneously outputting the control signals to the lights.
Something like this project:
http://instruct1.cit.cornell.edu/courses/ee476/FinalProjects/s2000/peterdan/final.htm
Just an idea.
-Matt
While hunting through Futurlec I came across these, they basicly got me thinking about the show player.
This is the sd card board.
http://www.futurlec.com/Mini_SC.shtml
This is the mp3 board.
http://www.futurlec.com/Mini_MP3.shtml
This lists all their control boards. I've got no idea which would be the right one to use.
http://www.futurlec.com/BasicControllers.shtml
probably not the cheapest way to go but it's a start.
Kev
klanger wrote:Has anyone got any thoughts on how to do a show player via SD memory cards?
Maybe a plug in unit before our boards that would run the shows without a pc. Wouldn't need to be the power supply just something to run the showKev
something like this for vixen
http://store.lightorama.com/dicawimp3pl.html
Interesting idea, Kevin - that type of integrated design puts this DIY once step closer to competing with commercial ventures. I believe, if memory serves me correctly, that Light-O-Rama has a device that does just that - a "Show-in-a-Box" controller.
David
I'm still new to this and have only really started looking at Vixen itself. If you want to put a Vix file on a memory stick and then plug it into a board that plays it may be difficult. The Vix file is an XML file that contains information about the show and Vixen then uses that information to send the correct signals to the correct pins of the ports.
It might be easier to create a device that records the signals coming out of the ports as if it was being sent to the different interface boards. And then play it back as if it is the computer.
Of course then we have to figure out how to sink the music to the signals.




