I don't have a led matrix as of now, what I do have is a spare TV with an HDMI input, and a Raspberry Pi.
What I would like to do is use my Pi as a E1.31 controller, and the TV as my Matrix.
Currently I don't think that there is a solution for this, and I don't have a lot of knowledge about the Pi.
So before I go wasting time looking into developing something that will make this work, does anyone have input about why it would or wouldn't ?
The Pi would need to have a web interface, which allowed you to setup all of the usual stuff, plus define the virtual size of your matrix. This would directly relate
to the way you setup your output in your sequencing software, as far as it was concerned it would be a true LED matrix.
I believe the fpp supports video files so you could use it to run your show and use a video editor to make video of what you want your matrix to do.
Are you thinking to have the Pi decode raw universe data and then generate a video output from pixels contained in that, or have the Pi act as a frame server? (i.e. Video frame information over E1.31 and then selects an image frame xxx to display)?
I have never done either, but I believe it should be feasible using OLA (Open Lighting Architecture), a web server, and custom module programming. I have been thinking about functionality similar to this for a different project so I would be interested in following your approach.
Ed
I'm thinking along the lines of something that would take the place of a regular matrix. Say I have a 12 x 50 matrix or pixels, and just plug the Pi in place of the e68x, I would expect the same look on the TV screen, with an option to draw the pixels as round or square.
why not just save your audio/video as an Mp4, attach that to your sequence, and when that sequence plays on the pi, it will trigger the hdmi output and display whatever video you have associated with the Mp4 (video and audio)
that way, u can put whatever video you want in there and it will play seamlessly with your audio and sequence, using Falcon Pi Player
Someone correct me if I am wrong, but I believe what bolwire is asking for is a way to generate a preview of live sequence data on a tv. While FPP can trigger and play Video on an event, it is not the quite the same thing.
You are correct ed. I want to use my TV just the same as I would a pixel matrix. Fpp wouldn't help me in my case, all of my controllers are renard, plus I want to use vixen to run my show.
FPP could help you if you wrote a channel output plugin in FPP to display an image on the FPP's display output. You could run FPP in bridge mode receiving E1.31 from Vixen and drawing the virtual matrix. I actually played around with something like this recently while testing some recent changes to FPP. I was using the memory mapped channel block data as input, but the same methodology would work for a FPP Channel Output driver using the regular channel data. I made a small C program that read the channel data for my test 10x10 matrix from the memory mapped block interface. I then created an X window on screen and used XFillArc() to display circle "pixels" in the window to show what would be on the real matrix at that point in time. I did it as a proof of concept for making a better test utility to use while working on FPP. I currently have a text-based 'virtual matrix' that just draws a single-color ascii-art version of a matrix but it is slow when the matrix size gets large. I wanted to see the feasibility of making a graphical virtual matrix for testing. I also used XFillRectangle to display square pixels, but preferred the look of XFillArc.
Oh I gotcha
