BasicStamp wireless...
 
Notifications
Clear all

BasicStamp wireless controller

3 Posts
3 Users
0 Reactions
2,117 Views
Posts: 14
Topic starter
(@sdeyoreo)
Eminent Member
Joined: 19 years ago
[#1628]

I made a cool wireless controller. I'm a newby so I made a simple 8 ch parallel port controller from 2 Parallax SSR boards that talked serial ( I had laying around). So I used a BasicStamp to read the parllel port and convert to serial and send to the SSR boards. Worked real good. This Vixen stuff is really neat. But I wanted lights on the porch and the computer is in the den. So I had a pair of 434MHz Tx/Rx modules, so I used another BasicStamp and a transmit module to read the parallel port and send it to the other BasicStamp with receive module that converts it to serial and sends 4 lower bits to one SSR boardand 4 upper bits to the other SSR board. Works real sweet! Even powered the remote unit with a NiCad battery.


2 Replies
Posts: 496
(@wombat)
Honorable Member
Joined: 19 years ago

What sort of speed did you get out of it?


Reply
Posts: 0
(@avatar-it)
Joined: 1 second ago

Details guys, Details.

in all seriousness i would love to see how you hooked it up what sort of code you used etc.

Peter


Reply
Share: