Just reading back to the first reply, you said that Crydoms would only switch on and not off if I am 250VDC - what is the reason for this? (also, I'm 250v AC not DC incase that makes a difference?)
Thanks again
wmrcomputers wrote:
Surely there is an 8 channel controller sold somewhere that works by simply selecting one of the pre-installed output plugins on vixen?? If not then I would be gob-smacked that nobody has wanted to "cash in" on such an opportunity. All I really need is something like the parallel relay card I have now but that works with triacs or whatever so that it's more reliable and QUIET! lol 😉
Most of the people on this forum are far more ambitious...
WMR, when I suggested the Crydom SSRs, they're awfully close to exactly what you want. These are high-capacity solid state relays, are about 2-1/2" square, have mounting holes, and you could simply screw them onto a board. They'd connect to your existing parallel outputs on the PC side, and you'd connect the heavy-duty power on the other side. You could use the existing controls you already have, or you could use Vixen's Basic Parallel plugin and that would work fine.
So essentially, all you'd need is a board to mount them on, a screwdriver, a couple dozen screws and you'd be good to go -- and you could handle a whole lot more current than 3A per channel. Yeah, it's not a prebuilt unit, but it's darned close.
BTW, Triacs don't work too well with DC current -- they work fine with AC. You need the zero cross value which exists in AC current for a triac to function properly, and SSRs are generally designed with triacs. To control DC current the same way, you'd probably use a MOSFET -- similar to a triac, but not quite the same. With a Triac and DC current, the triac would switch once, but when you removed the power to it (e.g. remove the signal to the SSR's triac) there is no zero cross part of the electrical wave so the triac doesn't shut off -- it just stays on.
Thanks dirk.... so from what you have said, these Crydom SSR's would work fine with our 250V AC current here in the UK then?
If so this definitely sounds like the way to go 🙂
Crydom SSRs come in all manner of specifications, and some can get a bit pricey. I bought several used ones from bmcgeeny, another member here on DIYC and I think they were only about $4 each. I don't know whether he has many left but you might be able to score a good buy on similar ones on ebay or elsewhere...
Here was bmcgeeny's original post...
http://doityourselfchristmas.com/forums/showpost.php?p=85566&postcount=1
I did some research on them and here's what I found out:
http://doityourselfchristmas.com/forums/showpost.php?p=86718&postcount=7
