xLights/Nutcracker ...
 
Notifications
Clear all

xLights/Nutcracker 3.2.1 released

18 Posts
8 Users
0 Reactions
5,647 Views
Posts: 2229
(@plasmadrive)
Famed Member
Joined: 15 years ago

Bug??
The end channel number in custom models is not correct. I have 150 RGB channels listed on this model, yet it shows the start channel at 451 and the end channel at 492. As a matter of fact all my models show the same number of channels 41 regardless of layout. They all have more than 41 channels in them.


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

Just curious if there is a bug with the custom effect? I have generated a cutom graphic with 150channels, 50 pixels, but when I try to copy it it re-numbers to a 72 ch display, when I just generated a 150 ch display? I try to copy, remake, etc and get the same thing? I have 5 exact props all the same just trying to seperate them but when I try to copy is goes all funky and want to make a 50 pixel (150 channel) display turns into a 72 channel display? I checked the .xml and it seems to be doing be consistent with what I am seeing?

I tried making one with template, it show up as 150 ch for a 50 pixel display when I initialy create it, but when I go back to modify it shows up as 72 channel? If I copy it, it shows as 72 channels, and just totally makes a mess of my addressing.

Then I went back, addressed 2 with what I wanted custom, showed right in the initial window, 50 pixels, 150 ch, when I went back it went from 150 ch to 72 ch and did the same to both, even the 2nd one I tried to make new using the same layout but creating new with the proper addressing with the new starting address and still the same problem. Both when I went back to look at them re-generated to 72 ch lengths?

Any thoughts?

Am I just doing something odd and missing something? I have watched a pile of instructional videos today, followed them all I think and geting the same bug?

Am I losing my mind or is this a legit bug?

FYI, It is a candle display matrix, 5 small, 2 medium, 1 large, trying to make flames different than candle bases but am stumped. I tried to create all thinking this would work, but now down to 2 small candles made all the same, flame and base with the same problem.

I can BS it with the pre-programmed props(string) but is a total pain, just seems to happen when I use custom effect. Is a pain to try to program a matrix using strings to simulate props instead of just the custom prop, candle in my case.

Any help would be greatly appreciated.


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

Follow up:

I think I see the bug, If you enter more than 2 pixels per horizontal row it gets mixed up. It counts each row(horizontal) from what I see as 1, so if you have a pixel on left and on right on the same row of a 5x48 matrix it only counts 1 for that row instead of 2. Or at least thats what I am seeing. I just made the matrix I am having issues with but made sure I only put 1 pixel per horizontal row and it adds up and even keeps count during a copy.

When I run the math it works out, 48 rows x 3 ch for each pixel is works out to 72chanels if you only count 1 per row. If you make your display with only 1 pixel displayed per row it does work. I repeated the same custom graphic but made sure it only had 1 pixel per row, when I finished the same 48 row prop was now 50 rows with only 1 pixel per row, 50 rows, 1 pixel each worked out to 150 channels and when I copy it over it stays at 150 channels for a 50 pixel display.


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

One more quirk,

If you copy a custom fixture the node layout doesn't update, custom effect 1 if copied to custom effect 2 just clones the node layout of the copied object and reacts the same, even if you change the start channel from what I have seen. Changing the pixel numbers in the custom grid to match where they should be in relation to starting at start ch of first display seems to work though, still playing.

Is also a bit confusing for labels as well, if start ch is actually start pixel then call it that, reffering it to as channel but it is really the pixel is a bit confusing.


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

A huge benefit would be able to copy and paste to/from Excel to nutcracker custom grid and vice versa, can mathematically fix this stuff quick in there and if you could copy and paste the re-calculated cells back and forth to the model would make changes so much easier.


Reply
Page 2 / 4
Share: