Is it possible to have 2 models over the same matrix - one which is organized by rows then columns, and the other which is columns then rows?
I will be using matrices on my pillars and will want to treat them as a whole matrix some of the time, but others I would want to operate on the rows or columns individually. The problem I run into is the channels are contiguous in one direction, but not in the other. The actual display will be running the strings vertically, so I'll have a 3x24 matrix for each column side.
So if I want to light up a particular row, the channels would not be contiguous - ignoring RGB for the moment, the top row might be channels, say 1, 25, 49; the 2nd row 2, 26, 50; the 3rd, 3, 27 51; and so on.
My thought was to use a custom model and put in the values that way. The problem there is that that custom model is treated as a bunch of pixels where instead I would like to group/sort those by the rows so in the sequencer I can just expand the model and see rows 1-24 and place effects on the rows directly.
I know I could brute force this by creating a custom model for just one row and then copying that model. Is there a better way before I go manually making 144 rows (I'll have 3 sides per pillar and have 2 pillars)?
you can have as many models over the same channel range as you want. but i dont think it is going to work the way u imagine. It doesn matter if you wrap a matrix horizontally, vertically when we create effects on a model they are viewed as a vertically aligned matrix. This is also true for arches, megatrees, eaves, stars. Everything is rendered back as a matrix.
This is whatt allows are effects to work on every model type.
So wrap lights horizontally and put on a bar effect going right. Works perfectly
wral lights vertically and copy the exact same effect on it, bars moving to teh right.
you can make individual models for each row or ocolumn and then drop effects on thoe. experiment is my suggestion
You can try this yourself. make a 10x20 matrix. set it to start upper left. This will cause the lights ro be wrapped horizontally. You can check the wrap by right cliking a model in LAYOUT and choosing display nodes
make another 10x20 matrix and say that it starts in bottlm left. Now the lights are wrapped vertically,
Drop the same effect on these two matrixes and look at what you see.
You can render each effect differently. So, one can be horizontal, one can be vertical. I'm not at my machine, but it's under render options, or I think that's the name of it.
James
Sent from my SM-G900V using Tapatalk
Yep, I actually didn't have much trouble using the matrix as a matrix - it's using the underlying strings where it gets complicated. If I ran the strings vertically, then I have 3 strings the compromise my 3x24 matrix that I can put effects on directly. I'm trying to figure out how to also do the converse - 24 strings of 3 pixels each ordered horizontally - so I can apply effects on those rows directly. I tested that up until around midnight last night, and didn't get it completely working (was probably getting my channel math wrong) but it looks promising that I can make custom model which has the proper offsets for a particular row and then copy that model and change the start channel. I think that should work.
I think what I'll end up doing is just wiring the columns horizontally. That makes things a bit more complicated on the physical model but not by much. So then the natural orientation is already by row. And if I want to do any effects on a column, I can use a custom model for that (in this way there would only be 18 custom models instead of 144).
Creating 18 models to sequence on one matrix? That is pretty much always unnecessary as well as using effects on the strands. Once I know what someone is trying to actually create there is usually an easier way. What kind of effects would you be putting on a specific string?

