When I set my layout initially, I used the arch setting and set the arches to 4.
I've come into issues where I want to isolate each arch but because they are set as a single unit I'm not sure how to do that.
Is this a shortcoming of my layout or is there a way to isolate each one?
onceler wrote:When I set my layout initially, I used the arch setting and set the arches to 4.I've come into issues where I want to isolate each arch but because they are set as a single unit I'm not sure how to do that.
Is this a shortcoming of my layout or is there a way to isolate each one?
In layout set arches to 4. Then set #of nodes to each arch. Lights = 1 and don't forget to have a start channel #
You can always make submodels, in this case 1 for each arch, and then apply effects to the submodel instead of the model which consists of all 4 arches. Or just redo the model and make 4 individual arches instead.
Ok so the advice to make submodels for arches is unnecessary. If you create an Arch with a count of 4 then you already by default get a submodel for each arch. Its just that we call them "Strands". When you expand a model into strands and nodes each arch is on its own strand and can be sequenced independently. Submodels internally are really about the same as a Strand.
But I assume if you want to isolate the arches its because you don't want them physically beside each other in the Layout. So just change the # of arches from 4 to 1 and then copy/paste the model 3 times and adjust the start channel for each one. Place them wherever you like. Copy from the picture not from the list. Click on the picture of the model then ctrl-c and then ctrl-v to paste.
What I am attempting to accomplish is animating the 4 count of arches individually without breaking my hard work on my sequence.
Effectively, they are seen as a group and I would like to do chases across one arch at a time for example instead of the group doing the chase at the same time.
