HI all, how can i add timing mark to concide with a syncopated beat, 50ms wont allow me to add a manual Timing mark where beat starts in the middle of 50ms timing bars.
Other vamp plugins don't matchup either exactly and if you wish to move "Note Onsets" you can only realign to the 50ms timing spacing, etc for other "timings"
Any ideas please as to is this a limitation of XL4 or am i doing something wrong?
cheers Boof63
This is how xlights works. You can't place timing marks greater than the resolution you selected for the sequence. If it's that important, change the sequence to 25ms.
James
Sent from my SM-G900V using Tapatalk
Yeah the sequence is going to be quantized into the minimum timing durations when saved so no reason to allow you to set a timing mark with better resolution than your final output. If someone is dead set on having a finer resolution it can be done. Just close everything down, delete the FSEQ file for the sequence, edit the XML file for the sequence and change the timing value in the header file. You can change it to any value you want. We just happen to only give you a few common values in the drop-down. So you could create a sequence with 10ms timing if you want.
Another thing to be aware of is when you run an Audacity plugin inside xLights to create timings I don't believe they have the timings that are calculated running through the function that snaps them to the timing divisions. So the best thing is to save and reopen after using one of those plugins because I know my code that opens a sequence moves all timing marks to the nearest timing division.
If you can notice 25ms difference in your blinky, how do you watch a movie at 24 frames a second?
50ms timing is noticeable on very slow fades. Not much at 25ms timing. But if your doing and manual fill and tweaking 25ms is double the boxes to fill.
