Text effect not wor...
 
Notifications
Clear all

Text effect not working

14 Posts
5 Users
0 Reactions
4,104 Views
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago

You have overlapping channels. Goto tools, check sequence. Also, look in the layout, megatree starts at 1 and goes to 4320. The star ends at 1500. Fix your models and you will be good to go. If you are just testing or sequencing, then the channel numbers really don't matter (as long as they don't overlap). Just put some garbage numbers in there for now. You can always fix this later. It will not impact your sequencing.

James


Reply
Posts: 104
Topic starter
(@trioxide)
Estimable Member
Joined: 11 years ago

Yes I noticed that in my testing and fixed it but that did not change the results. Just trying something simple now like On with a solid color and that is resulting in many colors with my pixels. Why would that be? In Advatek Assistant I do the testing and the colors come out fine so I know the pixels and controller are good. So what is setup wrong in xLights? Using the latest version and tried different settings for the megatree properties: like String Type. My pixels are GRB so that is how it is setup in xLights but none of the other options works either. I even removed the Star and Icicles models to no avail.


Reply
Posts: 104
Topic starter
(@trioxide)
Estimable Member
Joined: 11 years ago

Here are some pics of my setup if that will help. I have the pixel strings connected in the up/down configuration so 120 pixels per string up and then 120 down per output on the PixLite 16. Is this what is messing it up as I can't see a way to configure this in xLights? Just the # Strings, Nodes/String and Strands/String. Right now using 6, 240 & 2 but did try 6, 120 & 1 and no difference. But I don't see how that would affect the color. If I say all 1 color with the On command why am I getting multiple colors displayed on the pixels themselfs?

PixLite Configuration Control
PixLite Configuration LEDs
xLights Setup
xLights Layout1
xLights Layout2

Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago

Goto tools, test... here you can test each node/color. If you are commanding the first pixel in a string and that node on the model is not lighting up, then you have a mapping issue. Use the tools in xlights to help you troubleshoot. Everything you need is there at your finger tips. If I have time later I will look closer at what you posted, but for now use the test feature.

James


Reply
Posts: 104
Topic starter
(@trioxide)
Estimable Member
Joined: 11 years ago

That did it thanks. When I looked at the Tools Test and the individual channels the colors were getting mixed up between universes. It started as RGB in universe 1 and universe 2 was GBR, and etc down. So it was getting mixed up. I changed the setup from 512 channels per universe to 510 and now everything is working perfect. The colors are right and I can understand the text. Yeah.
Why does it allow 512 channels. If you have 3 colors per pixel that is 510 not 512? And this was a auto generate of the universes.


Reply
Page 2 / 3
Share: