Vixen had the ability to run a sequence in the background while the show was going playing the main sequence. How do you set this up in FPP/xLights? I am using a DMX decoder to SSRs to trigger my Tune-To sign as well as hitting AC power to my inflatables. Obviously I want these on the entire show and wish to shut down the inflatables after but leave the sign for a while after the show and eventually shut that off until the following day.
Looking to reproduce the Candle effect from Vixen 3 in xLights. And don't say fire because that is different since you have no real control over the flame parameters (min/max brightness, flicker rate, etc) nor over the pallet of colors used like Vixen's Candle has. I am wanting to apply this to PixaBulbs mounted in pumpkins to simulate a flickering candle flame.
Also, for the life of me, I can't figure out how to do a left-right (or up/down) light pulse across the display. I want to be able to select colors, have them blend softly (say blue and green soft faded together) and have the edges of the wipe nice and soft. Tried a varieity of effects but can't seem to get what I want with the soft edges.
Anyone have some tips or tutorials on this sort of effect?
If you name a file background.eseq it will run in the background on the FPP. When you right-click on a model row heading in xLights and choose Export Model one of the options create an .eseq FPP sub-sequence.
But I think you really want to use events in FPP to trigger inflatables and other channels. You'll need to research on the FPP forum how to do that. It involves creating memory map overlays to override channel blocks and writing a script to turn on the overlays and activate the channels. You can schedule the events to occur at the start and end of your show in FPP.
Here's my script that powers up my inflatables:
#############################################################################
# PowerUpInflatables.sh - Power up the inflatables
#############################################################################
#!/bin/sh
# Turn on the memory mapped block for the Inflatables
fppmm -m NeighborsYard -o on
fppmm -m RightInflatables -o on
fppmm -m LeftInflatables -o on
# Inflate the inflatables
fppmm -c 7977 -s 255
fppmm -c 7958 -s 255
fppmm -c 7959 -s 255
fppmm -c 25362 -s 255
fppmm -c 25363 -s 255
fppmm -c 25364 -s 255
fppmm -c 25365 -s 255
#############################################################################
I've never seen the Candle effect. It sounds easy enough to do with probably a Twinkle effect.
For what you described as a light pulse just create a morph effect, make the head length 0 so it's all tail, give it the colors you want, change the head duration to tune it's width, and if the edges aren't soft enough then add Blur to the effect.
I'll share what I have for candle flicker....I do it with pixels inside pumpkins as well
Sent from my SGH-M919 using Tapatalk
Wolfie wrote:Vixen had the ability to run a sequence in the background while the show was going playing the main sequence. How do you set this up in FPP/xLights? I am using a DMX decoder to SSRs to trigger my Tune-To sign as well as hitting AC power to my inflatables. Obviously I want these on the entire show and wish to shut down the inflatables after but leave the sign for a while after the show and eventually shut that off until the following day.Looking to reproduce the Candle effect from Vixen 3 in xLights. And don't say fire because that is different since you have no real control over the flame parameters (min/max brightness, flicker rate, etc) nor over the pallet of colors used like Vixen's Candle has. I am wanting to apply this to PixaBulbs mounted in pumpkins to simulate a flickering candle flame.
Also, for the life of me, I can't figure out how to do a left-right (or up/down) light pulse across the display. I want to be able to select colors, have them blend softly (say blue and green soft faded together) and have the edges of the wipe nice and soft. Tried a varieity of effects but can't seem to get what I want with the soft edges.
Anyone have some tips or tutorials on this sort of effect?
Since you're using FPP, and you really like vixen's candle flicker, why not just use vixen to do the sequence with the flickering candle and use that sequence as your effect sequence. I do exactly that for the candles on my advent wreath. your other sequences can come from anywhere.
BTW, an incan bulb does a much better job simulating a candle flicker because of it's natural rise/fall time. Those 4 bulbs on my advent wreath are the only incan bulbs in my display for exactly this reason.
Gilrock wrote:
I've never seen the Candle effect. It sounds easy enough to do with probably a Twinkle effect.
Gil,
The candle flicker effect is different enough from a twinkle that we keep it around as a separate effect. And it definitely has it's usefulness, candles are plenty popular as Christmas decorations. Unlike a twinkle that had individual independent pulses with varying density and intensity parameters, the candle flicker's pulses are interdependent. This effect causes the flame to brighten or dim somewhat randomly. each next pulse needs to be aware of the one before it so it can smoothly ramp from that position to the new one. Our candle flicker effect really isn't a pixel effect. It's primarily intended as a single element effect. It doesn't make a string or grid act in any coordinated way (like a twinkle or fire would). each element of the group is handled completely independently.
