RGBSB Target modele...
 
Notifications
Clear all

RGBSB Target modeler

26 Posts
7 Users
0 Reactions
12.2 K Views
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago
[#18895]

This thread is to talk about the portion of RGBSB that will model your megatree so RGBSB can put effects on it.

This is VERY important. If you cannot model your tree , you will NOT be able to use RGBSB.

This initial release is everything except for the editing of an existing tree. Since defining your tree should take less than 60 seconds, just build multiple models.

This release now allows you to create an account on rgbsb. One you create an account you will come into the target modeler screen.

This is what i need from you. Is there any reason you cannot model your existing or future tree?

I am aware of some people who have built tree in what i call a snake method. take a string, go up and then down and then go up again. I will be adding this soon.

Your models are being saved to the database, but it is not like you would lose alot of work. Like i said, you should be able to model your tree in a few minutes.

I expect the ability to edit an existing model will occur tonight.

Todays release is alpha, things may work and stop working. I am releasing code. I expect the stable version ot be released on Monday. I am doing the early release to get feedback.

So have fun http://meighan.net/rgbsb/login/login-form.php

thanks


25 Replies
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Submitted my model - a few things (and yes - I fully comprehend the meaning of "Alpha")

It's a bit hard to read the input bits all over the page - perhaps put a single entry widget with the parameters with explanations down below.
I'm hoping there's no limitation to the HW as I doubt most folks here will be using SmartStrings or CCRs (just a guess...) - I understand you're polling PC/DLA of course...

What happens now?


Reply
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago
budude wrote:Submitted my model - a few things (and yes - I fully comprehend the meaning of "Alpha")

It's a bit hard to read the input bits all over the page - perhaps put a single entry widget with the parameters with explanations down below.
I'm hoping there's no limitation to the HW as I doubt most folks here will be using SmartStrings or CCRs (just a guess...) - I understand you're polling PC/DLA of course...

What happens now?

What happens now is I verify that everyone can model their tree. I will choose some of the models entered to be come part of my test suite.

the next part is you need to create effects in your user space. Think of the effects you have seen, say the barber pole, the most simple spiral model i have.
That effect has these variables.

Number of stripes
How rotations a strip makes going from the top to the bottom
Color of each stripe
Thickness of stripe, in this case you say to fill it in till the next stripe
Rotation cw or ccw
Do you want the whole tree used or only half a mega tree

Now you will save this as say BARBER1 in your effects library.

Then you can select a target MTREE1 and a effect, BARBER1
I will ask you for the time quantum, say 50ms, and how long you want a sequence, say 5 seconds.

I now create one frame with every string#, pixel#, rgb value. In this case I will produce 100 objects

At this point I can make animated gif's. Notice so far the software is sequencer agnostic.

I expect you will look at the animations and maybe go back and modify your effects and try again.

When satisfied, you select a sequencer and I produce the Lms,vix or lsp file. You then import it into your sequencer and should see what I previewed for you,
Cut and paste it ( here I get fuzzy since I have used any sequencer software)

In summary
1) you must build your rgb using the target modeler . You just finished this step.
2) u need to select an effect from your personal library of effects u like. I have not released this tool yet. It should be released within the next 1-2 weeks.
3) optional at this point is to get an animated gif to preview
4) finally, you get an output file for your sequencer

(1) is functional now. I know I will want to change the layout, the usability, the prompts and expand it to model matrix or grids.

(2) is maybe 70% done. Actually building the models, discovering what variables need to be changed, is complete.
What is left is another form where you select from this list
Spirals, bands, meteors, pictures,text
You then get prompted for the variables that belong to that effect. U name this effect and it goes into your library

(3) is done, it needs some clean related to scheduling Linux tasks, cleaning files and such. But the guts of it is done

(4) XML output for sequencers. I have LOR maybe 40% done, vixen 10%, LSP 5%. I need some people's models to work here, what people have done this weekend will help.

I have stated all 4 of these will be done by summer.

Thanks for the feedback


Reply
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago
budude wrote:Submitted my model - a few things (and yes - I fully comprehend the meaning of "Alpha")

It's a bit hard to read the input bits all over the page - perhaps put a single entry widget with the parameters with explanations down below.
I'm hoping there's no limitation to the HW as I doubt most folks here will be using SmartStrings or CCRs (just a guess...) - I understand you're polling PC/DLA of course...

What happens now?

Hi Brian, i have re-arranged the page. i think it is probably easier to fill in now.
There is no hardware limit on the tool. The reason i am prompting for what kind of device is in case i need to know something about the device when i am creating the xml file.

I want to finish the edit capability tomorrow. This will be where u can click on an existing model and it will load the form and allow editing.

I hope in the next week i can get the effects modeler done. This will allow people to start creating a personalized library of effects they want. Right after this , i hope i get the ability to let you get an animated gif.

So after the next few weeks, i will be focused on xml files while users can continue to try effects out on their trees. It would be easy for a user to try adding a few more strings or taking away some strings and see how the display improves. and for people like me who have not ordered any rgb devices yet, i can try various combinations and decide what will work best for me.

i was thinking of starting with 12 strings. but i need to try various effects and see.

thanks


Reply
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago

over 40 people registered today. 30 models were created. I got some feedback and i fixed some bugs. A very good start.

Thanks

http://meighan.net/rgbsb/login/login-form.php


Reply
Posts: 14
(@keitha43)
Active Member
Joined: 16 years ago

I would like to see an effect that is like the barber pole but start at the bottom of the tree and fill in as it spirals toward the top of the tree like an auger. Or from the top downward.


Reply
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago
rimist wrote:
I know that I'm one of the few, but I decorate for many more holidays than Christmas. That being said, I wonder if you would consider as part of your long term plan some models using different shapes: a heart 2d/3d, a clover 2d/3d, a rainbow with a pot of gold, a flag, a tombstone, a pumpkin 2d/3d, a skull 2d/3d.

-Rimist (via Tapatalk)

Short answer is yes.

To handle these, I will either build a web page template or give the user the ability to upload their own file.

After a target gets made, there is a file that looks like this. The bottom center of a tree is 0,0,0, vertical axis is the Z axis
This is an 8 strand megatree, with 35 pixels each strand.

The file order is
ModelName String# Pixel# X Y Z

With this file, i can project all the effects so see so far on rgbsb. When you "create a model", you give me answers that allow me to build this physical tree.

# t1_88.dat
t1 1 1 0.000 0.849 116.605
t1 1 2 0.000 1.698 113.209
t1 1 3 0.000 2.547 109.814
t1 1 4 0.000 3.395 106.418
t1 1 5 0.000 4.244 103.023
t1 1 6 0.000 5.093 99.627
t1 1 7 0.000 5.942 96.232
t1 1 8 0.000 6.791 92.836
t1 1 9 0.000 7.640 89.441
t1 1 10 0.000 8.489 86.045
t1 1 11 0.000 9.338 82.650
t1 1 12 0.000 10.186 79.254
t1 1 13 0.000 11.035 75.859
t1 1 14 0.000 11.884 72.463
t1 1 15 0.000 12.733 69.068
t1 1 16 0.000 13.582 65.672
t1 1 17 0.000 14.431 62.277
t1 1 18 0.000 15.280 58.881
t1 1 19 0.000 16.129 55.486
t1 1 20 0.000 16.977 52.090
t1 1 21 0.000 17.826 48.695
t1 1 22 0.000 18.675 45.299
t1 1 23 0.000 19.524 41.904
t1 1 24 0.000 20.373 38.508
t1 1 25 0.000 21.222 35.113
t1 1 26 0.000 22.071 31.717
t1 1 27 0.000 22.920 28.322
t1 1 28 0.000 23.768 24.926
t1 1 29 0.000 24.617 21.531
t1 1 30 0.000 25.466 18.135
t1 1 31 0.000 26.315 14.740
t1 1 32 0.000 27.164 11.344
t1 1 33 0.000 28.013 7.949
t1 1 34 0.000 28.862 4.553
t1 1 35 0.000 29.711 1.158

t1 2 1 0.600 0.600 116.605
t1 2 2 1.200 1.200 113.209
t1 2 3 1.801 1.801 109.814
t1 2 4 2.401 2.401 106.418
t1 2 5 3.001 3.001 103.023
t1 2 6 3.601 3.601 99.627
t1 2 7 4.202 4.202 96.232
t1 2 8 4.802 4.802 92.836
t1 2 9 5.402 5.402 89.441
t1 2 10 6.002 6.002 86.045
t1 2 11 6.603 6.603 82.650
t1 2 12 7.203 7.203 79.254
t1 2 13 7.803 7.803 75.859
t1 2 14 8.403 8.403 72.463
t1 2 15 9.004 9.004 69.068
t1 2 16 9.604 9.604 65.672
t1 2 17 10.204 10.204 62.277
t1 2 18 10.804 10.804 58.881
t1 2 19 11.405 11.405 55.486
t1 2 20 12.005 12.005 52.090
t1 2 21 12.605 12.605 48.695
t1 2 22 13.205 13.205 45.299
t1 2 23 13.806 13.806 41.904
t1 2 24 14.406 14.406 38.508
t1 2 25 15.006 15.006 35.113
t1 2 26 15.606 15.606 31.717
t1 2 27 16.207 16.207 28.322
t1 2 28 16.807 16.807 24.926
t1 2 29 17.407 17.407 21.531
t1 2 30 18.007 18.007 18.135
t1 2 31 18.608 18.608 14.740
t1 2 32 19.208 19.208 11.344
t1 2 33 19.808 19.808 7.949
t1 2 34 20.408 20.408 4.553
t1 2 35 21.009 21.009 1.158

t1 3 1 0.849 0.000 116.605
t1 3 2 1.698 0.000 113.209
t1 3 3 2.547 0.000 109.814
t1 3 4 3.395 0.000 106.418
t1 3 5 4.244 0.000 103.023
t1 3 6 5.093 0.000 99.627
t1 3 7 5.942 0.000 96.232
t1 3 8 6.791 0.000 92.836
t1 3 9 7.640 0.000 89.441
t1 3 10 8.489 0.000 86.045
t1 3 11 9.338 0.000 82.650
t1 3 12 10.186 0.000 79.254
t1 3 13 11.035 0.000 75.859
t1 3 14 11.884 0.000 72.463
t1 3 15 12.733 0.000 69.068
t1 3 16 13.582 0.000 65.672
t1 3 17 14.431 0.000 62.277
t1 3 18 15.280 0.000 58.881
t1 3 19 16.129 0.000 55.486
t1 3 20 16.977 0.000 52.090
t1 3 21 17.826 0.000 48.695
t1 3 22 18.675 0.000 45.299
t1 3 23 19.524 0.000 41.904
t1 3 24 20.373 0.000 38.508
t1 3 25 21.222 0.000 35.113
t1 3 26 22.071 0.000 31.717
t1 3 27 22.920 0.000 28.322
t1 3 28 23.768 0.000 24.926
t1 3 29 24.617 0.000 21.531
t1 3 30 25.466 0.000 18.135
t1 3 31 26.315 0.000 14.740
t1 3 32 27.164 0.000 11.344
t1 3 33 28.013 0.000 7.949
t1 3 34 28.862 0.000 4.553
t1 3 35 29.711 0.000 1.158

.etc.

I will be crreating a chapter in the future manual, to talk to how to model other shapes besides a tree or grid.

Remember my original title for this tool "RGB Sequence Builder for Megatrees/Planes or any other arbitrary object"

that has been my architecture design

thanks


Reply
Posts: 792
(@boarder3)
Noble Member
Joined: 19 years ago

For pictures is it possible to not spin and just leave it a still in front. And the same for video if you get that going?


Reply
smeighan
Posts: 2595
Topic starter
(@smeighan)
Famed Member
Joined: 15 years ago
boarder3 wrote:For pictures is it possible to not spin and just leave it a still in front. And the same for video if you get that going?

Yep, that is just one of the parameters I will expose to when u see the effects modeler

Pictures
Image file (png,jpg,gif)
Rotate? Cw,ccw,none

Other effects

Spirals
Number of threads( arms,strands)
Number of rotations of thread, top to bottom?
Thickness of thread?
Auto fill between threads?
Rotate? Ccw,ccw,none
Starting color of thread?
Ending color of thread?

The barber pole, 3 strand, 6 strand all ere the same effects generator

Bands
Number of bands?
Color of each band?
Rotation ccw,ccw,none

So forth

I hope to get the effects modeler on line within next week


Reply
n8huntsman
Posts: 562
(@n8huntsman)
Honorable Member
Joined: 16 years ago

There is a tree style that has crossed my mind that can not be modeled. Not sure if anyone has ever tried to build one like this or not, but... I was thinking about a tree that was constructed with with rings. Make a ring at the base Ø, then another 6 inches or so above that, and repeat all the way to the top. The advantage is that your resolution remains constant throughout the entire tree. You would have to use quite a few guy wires made from something like fishing line so you would end up with somewhat of a polygon rather than circles but I think it might work.


Reply
Page 1 / 3
Share: