I have tried to create a 'ray' target model and setup a simple spiral. The ray has 10 pixel strings with 50 pixels per string. When I preview the spiral effect, it looks like a simple narrow matrix. Am I missing something?
Forgive me if this subject has been addressed somewhere on the forum ... I have searched but cannot locate a similar question.
last I knew "ray" didn't work so I've never tried it. That was way back when it started so maybe it works now. My understanding is a matrix is a rectangle. Mega tree you take the matrix make one end round and the other all squeezed together to a point. And a ray is in between without the round. And it hasn't been talked about yet that I've seen, so your breaking new territory.
Brian
Skunberg wrote:last I knew "ray" didn't work so I've never tried it. That was way back when it started so maybe it works now. My understanding is a matrix is a rectangle. Mega tree you take the matrix make one end round and the other all squeezed together to a point. And a ray is in between without the round. And it hasn't been talked about yet that I've seen, so your breaking new territory.Brian
for a ray, just use a megatree target for now. The only difference is how i display it. set your effects to 180 degree window. remember for half megatrees you tell me the total strings it would take to make a complete tree.
Example: You have 8 strings that you will set up as a ray.
You would choose
Megatree
16 strings
window 180 degrees
This will produce an effect that is correct on a 8 string ray.
I am doing work right now on the horizontal matrix target.
I am an assistant scout leader. My twin boys are on a one week camping trip at Peaceful Valley Scout camp (3400 acres in Elbert, Co).
In the middle of the day the scouts are going to merit badge classes. So from 9am to 2pm each day i drive to a nearby town where i get a coffee and program some on nutcracker.
On this trip was the first time my sons have ever seen the milky way, so awesome.
so i hope to get the horizontal matrix target by tomorrow.
I am thinking of finishing the ray target, add RGB arches as a target and maybe building a Weber Tree target for non-RGB strings. This is because i may have a second tree that is non-rgb. If i do make a weber tree target, i will add a new effect class that will have a library of effects.
anyone else might be interested in a non-rgb tree and effects?
thanks
sean
If you have enough pixels Nutcracker makes wonderful spirals, so I figured the Weber tree was a mute point.
I run a hybrid now in minis. When I replace it the need for extra strings spiraled will be gone.
Brian
My thanks to Sean and Brian. I'll go with using a megatree model for now.
Sean - enjoy the time with the kids....they really do grow up fast

