hmm - I don't know if it was the same exact error but I had Vixen crash on me as well while doing an import. This was with a routine that I had previously that was 1-second long. I assumed it was just a corrupted download and so I recreated it but at 10 seconds and it worked OK after that. Mine was a butterfly sequence.
Hi Brian,
Ex of wrong:
0 0 0 0 0 255 0
0 0 0 0 255 0 0
Should be:
0 0 0 0 0 255 0
0 0 0 0 255 0 0
Sean:
Emmanuel
Skunberg wrote:Tried to make a new file from Nutcracker again, twice changed timing on the second one. Neither worked with Vixen. Same error. Tried to PM and post file but DIYC won't let me post it either way.Brian
I will look into it when I get home tonight. I am in Colorado springs today (about 70 miles from my home). I am performing in a couple of concerts today. I will get home around 10pm, I think this bug was introduced when I added the code to make sure I output blank channels. For any channel that is never used by nutcracker I output a row of zeroes. Maybe there is an extra line feed there.
Thanks
3 new tutorials. These will show how to get a Nutcracker animation into Vixen. They will also show how to install Emmanuel's 3 addins into Vixen.
If you are using Nutcracker and Vixen, i believe you must get these.
http://emmanuelmiranda.info/?page_id=10
http://meighan.net/nutcracker/tutorials/VixenTutorial1.swf
http://meighan.net/nutcracker/tutorials/VixenTutorial2.swf
http://meighan.net/nutcracker/tutorials/VixenTutorial3.swf
Hi I tried to FTP download the tutorals, but I could not even get past logging on. Went to FTP.nutcracker123.com and get the little window open asking me to log on. So, I tried to use the "nutcracker" with the password "xfer1011" as noted in the first post. Did I do something wrong? As long as I have been around computers, FTP has not be a big usage in my life. Only done maybe half dozen in my 54 yrs. Thanks

