I have a prototyped a solution for having a horizontal target on Nutcracker.
Before, I implement this I need to know how you have built your horizontal targets.
If you need a horizontal matrix in Nutcracker, please reply to this post and answer the following questions
How many strings and pixels?
Example 16x50
Where is string1, pixel 1 located?
Example bottom left, top left, bottom right, top right
Do you fold your strings into multiple rows?
Example: yes, 2 folds per string.
If the folds dont produce an even division, what do you do with the extra pixels?
Example: 8x50 folded 3 times would make each string into 3 rows (48 pixels) with 2 left over.
Answers: could be, i cutoff the extra pixels, i continue wrapping them causing pixel 1 of the next string to start to move along the target.
with these questions, i think i can get some of you a horizontal matrix target this week.
thanks
Sorry, no details to share but since I'm planning on a pixel matrix for 2013 I'll be following this closely.
I'm curious though, is there any perceived advantage/disadvantage to zigzagging your pixels vertically vs horizontally - aside from Nutcracker not supporting horizontally for the remainder of today? 😉
Thanks,
-joni-
I think what ever direction you pull the strings , you probably have better spacing between the pixels.
If I wanted a matrix for showing horizontal, scrolling text, I ewould use a horiz matrix.
If I wer presenting pictures and gifs, I would use a vertical matrix
If I wanted perfect spacing, I might take a sheet of peg board drill holes three inch on center.
That would be a lot of work and makes storage more difficult.
I soon will be providing horiz matrix support.
If I wanted perfect spacing, I might take a sheet of peg board drill holes three inch on center.
You mean like this
32 strings of 42 pixels vertical - the square type pushed through 1/2" wire mesh at 1" spacings.
I have been using it to view you fantastic effects - the pixels will go on the tree for a switch on this weekend.
Barnabybear wrote:You mean like this
32 strings of 42 pixels vertical - the square type pushed through 1/2" wire mesh at 1" spacings.
I have been using it to view you fantastic effects - the pixels will go on the tree for a switch on this weekend.
Wow!, that is impressive.
I bet pictures and images would look good on your matrix.
thanks
sean

