No output in xLight...
 
Notifications
Clear all

No output in xLights

12 Posts
6 Users
0 Reactions
4,170 Views
Posts: 123
Topic starter
(@randyn)
Estimable Member
Joined: 17 years ago
[#39666]

I'm trying to test the lights and i'm getting no output.

What am I doing wrong?

Here's my configuration.

xlights setup

controller 1

controller 2

controller 3

controller 4

Thanks,

Randy


11 Replies
Lionking_Tx
Posts: 780
(@lionking-tx)
Prominent Member
Joined: 15 years ago

Stupid question - You activated the output by clicking on the light bulb in Xlights, did you ? That's what I keep forgetting 🙂


Reply
Posts: 123
Topic starter
(@randyn)
Estimable Member
Joined: 17 years ago

Yes, the output is activated 🙂


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago

Try testing via the hardware first. Very interesting how you have your universes setup.


Reply
tucsonlights
Posts: 667
(@tucsonlights)
Honorable Member
Joined: 15 years ago

Your IP address and gateway are on two different networks. 192.168.2 and 192.168.1


Reply
JCook
Posts: 1003
(@jcook)
Noble Member
Joined: 13 years ago
randyn wrote:I'm trying to test the lights and i'm getting no output.

What am I doing wrong?

Here's my configuration.

Thanks,

Randy

Your universes in the first controller are wrong.

You have

group 1 as universe 100 -1 to 100-432 that's ok
group 2 as universe 101-1 to 101-216 this should be 100-433 to 101-138.

Jay


Reply
Posts: 123
Topic starter
(@randyn)
Estimable Member
Joined: 17 years ago

I forgot to add that this works in Vixen 2.1


Reply
MindTrik
Posts: 1542
(@mindtrik)
Noble Member
Joined: 16 years ago

As stated...your computer and show networks are different...

Sent from my LG-H811 using Tapatalk


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago
randyn wrote:I forgot to add that this works in Vixen 2.1

Then you have things setup incorrectly in xlights. Double check your models and how they are mapped to channels.


Reply
MindTrik
Posts: 1542
(@mindtrik)
Noble Member
Joined: 16 years ago

Type cmd in the run or search field in Windows and type "ipconfig" without the quotes. Paste the output here

Sent from my LG-H811 using Tapatalk


Reply
Page 1 / 2
Share: