How does xLights handle effects, channel assignments, LOR network with the conversion process?
Takes a little practice getting all the networks talking, I struggled with a few last season, can't imagine trying to figure out a lg. display
Sent from my Torque using Tapatalk 4
Channel assignments are easier now - the mapping to LOR sequences is listed on the first tab. xLights only plays back files in the xLights format (.xseq), but you can easily convert LOR sequences to the xLights format using its built-in converter. During the conversion process, LOR effects are reproduced in software and the result saved in the output. This is what I have done the last 2 years - sequence in LOR and then use xLights to convert and schedule. xLights can send output to LOR networks, but it is inefficient. You can use it to drive a few controllers (up to 6 at 115K baud), but it is much better to just run your LOR controllers in DMX mode.
Hope that helps,
Matt Brown
xLights developer
Matt... thanks for the info. I may have some questions later on this project.
wbottomley wrote:I may have some questions later on this project.
or maybe a PM or two in the near future
Matt, thanks, I'll have to get a hold of the newer version since I last downloaded, and check out the better mapping. I know some on here I talk to, have had great success in running large pixel count displays with it.
