Issues with moving ...
 
Notifications
Clear all

Issues with moving a model in the preview window

15 Posts
8 Users
0 Reactions
7,246 Views
Posts: 1168
Topic starter
(@keith-r)
Noble Member
Joined: 19 years ago
[#36644]

First, I would like to say that I am new to the XLights/Nutcracker environment, but I have watched the relevant tutorials and am moving along with mapping my channels and making models in the preview. I am finding this going surprisingly well and very easy for this Vixen veteran. Kudos to Sean and the XLights team. My problem is with the moving of the models after they are created. In most cases, I have to click above the model in order to highlight and move it. If the model is larger (model size 33), I have to click about an inch above the model. If is smaller (5), I have to click about 3/8 inch above the model to highlight and move it.
The original picture size was 2856 x 1904 and I lowered that to 1620 x 1080. I had to change that size in the preview screen to 1620 x 900 just to get the lower part of the picture in the preview. The biggest issue that I have is that some of the models overlap and if I am trying to move something smaller near one of the larger models, if I drop it, I can't pick it up again, because it is in the field of another model (but not physically). I know I have seen others with the same issue, but I don't know how to correct it.
Again, I am looking forward to sequencing a completely new show this year, and so far, I am impressed with the functionality.
I am using ver 4.0.16 Apr7, Windows 8.1, an ASUS R 9270 video, and a screen resolution of 1920 x 1080.
I still need to add Fast Fall Tubes and my mini floods. I wanted to hang the tubes off of the house, but it is proving to be difficult.
Here is a screen shot.

house show

14 Replies
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

You can try clicking on the model name in the model list and it will highlight the appropriate model. Then try grabbing that. Sometimes I just have to move the model that is on top of another way off to the side, move the model I am having trouble with and then move the overriding model back.


Reply
Posts: 1168
Topic starter
(@keith-r)
Noble Member
Joined: 19 years ago

Clicking on the model name in the model list does highlight the model I am trying to move, but as soon as I click on the model, it becomes "un"highlighted. I can't click on the center of the model, I have to click somewhere above it to highlight or move it. Not even to the side of the model, only above it.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

There is an issue with the mouse selection mapping to the model position in that window. I've tried looking at that code and didn't figure out what's causing it yet since I didn't write any of it. It sounds like others usually fix the problem by trying different Height settings. I use 1280x720. I just had trouble grabbing a single line tonight and I got around it by dragging the model size larger for that model then I was able to grab it and move it and then I tweaked the size back down by typing in the original number.


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

yeah I have been working around this same problem same way gil said he has


Reply
Posts: 512
(@habbosrus)
Honorable Member
Joined: 14 years ago

I'm having a lot of trouble with this issue. I am using a 15" laptop. Would it make a difference if I were to use a larger monitor perhaps? Are there any other workarounds?


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

I'll try to look into this tonight if Dan doesn't fix it before I get home. It's affecting enough people we should fix it instead of asking everyone to play around with sizes. The only other workaround I could guess is temporarily change it to a matrix to give it some height. Then move it and change the model type back to a string.


Reply
Posts: 482
(@jcmarksafb)
Honorable Member
Joined: 15 years ago

Another thing that would help is being able to move the model with the arrow keys as well as the mouse.
John


Reply
sonic777
Posts: 154
(@sonic777)
Estimable Member
Joined: 14 years ago

I second the arrow keys with shift and control to go large or fine movement.

Sent from my HTC One using Tapatalk


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

I played with my picture today had it set as 1080 x 920 change4d it too 1080 x 600 and now I can click on the item and move it without a problems you might wanna play with what size you showing picture as


Reply
Page 1 / 2
Share: