Hello to all
I got the material to make my first tree,,,,,
The components are working individually, just that I can not configure the program nutcracker to do what I want.
I would like to do (for the uninitiated Pixelite16 has 16 output ports), a tree with 22 strips of LEDs with 150 pixels per Stick it, and to do this since I have not thought of using the 22 ports "zigZig" to join the two strips as the single port supports it, which of course I do not only work, and I thought I'd ask for your help because something definitely wrong, but I do not know what ....
you attack a picture of my configuration of nutcrackers, and to make my tree I thought I would create a matrix using the "custom" but definitely something wrong with the preview function works, I convert the file to the FPP but unfortunately it does not work.
Sorry for my bad English, and thank you all from now on give me aid
it looks like you are treating this like 11 strings of 300 pixels folded.
try these


No, unfortunately I can not get it to work, I followed your advice but it does not work.
The strip of return does not work, the first piece of work according to the no ........
where mistake
using the TEST tab of xlights, you should be able to turn each light on 1-300 for first strip, 301-600 for next two strips.
If this doesnt work then the configuration is screwed up on either the xlights SETUP tab or in the setup of the Pixlite-16.
does the Pixlite 16 use all 512 channels in a universe? If yes, then your 3300 lights (9900 channels) requires 20 E1.31 universes to be setup in the SETUP tab.
I assume each of the 11 strings needs to be told the starting address on the Pixlite-16?
string 1: ch 1
String 2: ch 901
String 3: ch 1801
.etc.



