Mini Trees That Sto...
 
Notifications
Clear all

Mini Trees That Store Flat!

10 Posts
7 Users
0 Reactions
4,778 Views
hasoon
Posts: 520
Topic starter
(@hasoon)
Honorable Member
Joined: 15 years ago
[#22283]

I have very little storage at my house so everything thing I make I first have to figure out how it will be stored. So this is what I came up with for my mini-trees.

First I made an A-frames out of bamboo garden stakes and galvanized wire.

IMAG0221

Next I covered each A-Frame with 1 string of white and 1 string of multi.

IMAG0222

And 2 zip ties hold 2 of the A-frames together. (rear view)

IMAG0223

Plugged in!

IMAG0225

Come January I just have to cut 2 zip ties and stack to store.

My initial plan was to hinge the 2 in the middle, but if I left them loose enough to fold I had to add an extra support. This ended up being simpler.


9 Replies
Posts: 141
(@rogerv)
Estimable Member
Joined: 18 years ago

How many lights have one of those strings? I like how it looks i will try this with some 100ct mini lights that I don't use. And the best thing is that is easier to do than with the tomatto cages (it's imposible to find them in spain)


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Very clever! And the bamboo garden stakes will prevent GFCI tripping, too! Well done!


Reply
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago
Reply
chelmuth
Posts: 1077
(@chelmuth)
Noble Member
Joined: 16 years ago

No i wish i hadn't let all the trash people take my bamboo i just finished cutting down in the back yard. I think i'm gonna start a store.. Precut Bamboo for minitrees LOL.


Reply
jrock64
Posts: 1099
(@jrock64)
Noble Member
Joined: 19 years ago

My take on a fold flat mini tree that I have used for several years.

http://doityourselfchristmas.com/forums/showthread.php?16608-2-D-Folding-mini-tres&highlight=folding

Joel


Reply
hasoon
Posts: 520
Topic starter
(@hasoon)
Honorable Member
Joined: 15 years ago
rogerv wrote:How many lights have one of those strings? I like how it looks i will try this with some 100ct mini lights that I don't use. And the best thing is that is easier to do than with the tomatto cages (it's imposible to find them in spain)

There is a 100ct white incan and a 70ct. multi LED on each a-frame. The Bamboo pieces are 3ft long.


Reply
hasoon
Posts: 520
Topic starter
(@hasoon)
Honorable Member
Joined: 15 years ago
jrock64 wrote:My take on a fold flat mini tree that I have used for several years.

http://doityourselfchristmas.com/forums/showthread.php?16608-2-D-Folding-mini-tres&highlight=folding

Joel

Actually Joe, Thank You for the inspiration! I remember studying your post when looking for ideas. I just wanted to go with something wooden instead of wire because where I live in Ohio we get mostly freezing rain in December and I had GFCI fears.


Reply
gassy
Posts: 548
(@gassy)
Honorable Member
Joined: 17 years ago

You inspired me! After making arches with the bell end of 3/4" conduit I was left with a bunch a 7' pieces. I've been toying around with the idea of using them for mini trees and after seeing your post I chopped up the pieces and zipped tied them together. In one of the vertical pieces I notched in a place for a DirkCheap SSR (based on kychristimas's idea).


Reply
hasoon
Posts: 520
Topic starter
(@hasoon)
Honorable Member
Joined: 15 years ago
gassy wrote:You inspired me! After making arches with the bell end of 3/4" conduit I was left with a bunch a 7' pieces. I've been toying around with the idea of using them for mini trees and after seeing your post I chopped up the pieces and zipped tied them together. In one of the vertical pieces I notched in a place for a DirkCheap SSR (based on kychristimas's idea).

I went back and forth between the bamboo and EMT. I thought the bamboo would look better in the daytime, but if I had extra conduit I would have certainly used it.

Nice Drill! (It looks like the same one that made an appearance in my pics) LOL


Reply
Share: