Wrapping real trees...
 
Notifications
Clear all

Wrapping real trees in pixels

22 Posts
9 Users
0 Reactions
12.1 K Views
Posts: 173
Topic starter
(@smerk)
Estimable Member
Joined: 10 years ago
[#44707]

Sorry if this post is in the wrong area. I'm new to pixels, but I've seen many folks light up their displays by wrapping traditional incandescents or leds around tree trunks, continuing up through the branches, usually varying colors. I think this looks great! But I want to do something similar with pixels. Has anyone done this sort of thing before? Wrapping them around the tree is potentially wasteful since pixels in the back wouldn't be seen. Just wondering if anyone has come up with a creative idea!

Posting this in the megatree topic area because there is no area for maple trees!


21 Replies
Posts: 706
(@chadowamsley)
Prominent Member
Joined: 15 years ago

Check out Nutz4lights walk thru video. He wraps an oak tree and some palms. He also has some videos of his show running on here I believe, if not, I know he does I the Falcon forum.

http://doityourselfchristmas.com/forums/showthread.php?46395-Nutz4lights-2016-Behind-The-Scenes-quot-Cape-Sable-Lights-quot&p=455985#post455985


Reply
Posts: 173
Topic starter
(@smerk)
Estimable Member
Joined: 10 years ago
chadowamsley wrote:Check out Nutz4lights walk thru video. He wraps an oak tree and some palms. He also has some videos of his show running on here I believe, if not, I know he does I the Falcon forum.

http://doityourselfchristmas.com/forums/showthread.php?46395-Nutz4lights-2016-Behind-The-Scenes-quot-Cape-Sable-Lights-quot&p=455985#post455985

Yes - this was very helpful. Thanks!


Reply
Posts: 598
(@nutz4lights)
Honorable Member
Joined: 17 years ago

Thanks for posting the link Chad!

Smerk, i agree with you on not wanting to waste pixels on the back of the tree. As you can see near the beginning of the video Chad linked above, we only have lights on the front of those palm trees since the back of the tree isn't visible from the street. That being said, our oak tree is only 15 years old. Most of the branches are less than 6 inches in diameter. It was just easier to fully wrap the branches. The trunk could be wrapped just on the front but we wrapped the whole thing around.

Let me know if you can't find our show videos from this year.

Louie

Sent from my SM-G928V using Tapatalk


Reply
Posts: 255
(@frankv)
Reputable Member
Joined: 17 years ago

I'm not sure if you're talking about pixels as discrete elements, or as strips. I've put dumb RGB strips (with WiFi controllers) up the trunks and branches of my trees for a couple of years... I expect that pixel strips would be a similar experience...

1. It's a PITA wrapping strips around the trunk and branches, they fall down and then tighten up if you try to pull them up. I did run them straight up and down the branches one year which was much easier.
2. You need a lot of LEDs per tree -- our trees are smallish, and I go to about 3 metres above ground where the leaves start, and use 20-25m per tree. You can't just wire things up as one long strip; I ended up with a tree-shaped network of strips. That would make programming your pixels awkward. You might want to consider running one strip of pixels from the bottom of the trunk up to each branch that you want to illuminate.
3. The best way I've found to hold strips in place (so far, open to suggestions!) is to put staples at even spacings up the tree trunk beforehand (one staple per every 2 wraps or so), then cable-tie to strip to the staples.
4. What works *really* well here in NZ (leaves on the trees at Xmas) is disco lights shining upwards onto the bottom of the leaves. I also saw a tree with laser spots projected onto it which looked really good. I think either of these could be great on (e.g.) palm trees.
5. Waterproof strips aren't really waterproof.


Reply
Posts: 173
Topic starter
(@smerk)
Estimable Member
Joined: 10 years ago
frankv wrote:I'm not sure if you're talking about pixels as discrete elements, or as strips. I've put dumb RGB strips (with WiFi controllers) up the trunks and branches of my trees for a couple of years... I expect that pixel strips would be a similar experience...

1. It's a PITA wrapping strips around the trunk and branches, they fall down and then tighten up if you try to pull them up. I did run them straight up and down the branches one year which was much easier.
2. You need a lot of LEDs per tree -- our trees are smallish, and I go to about 3 metres above ground where the leaves start, and use 20-25m per tree. You can't just wire things up as one long strip; I ended up with a tree-shaped network of strips. That would make programming your pixels awkward. You might want to consider running one strip of pixels from the bottom of the trunk up to each branch that you want to illuminate.
3. The best way I've found to hold strips in place (so far, open to suggestions!) is to put staples at even spacings up the tree trunk beforehand (one staple per every 2 wraps or so), then cable-tie to strip to the staples.
4. What works *really* well here in NZ (leaves on the trees at Xmas) is disco lights shining upwards onto the bottom of the leaves. I also saw a tree with laser spots projected onto it which looked really good. I think either of these could be great on (e.g.) palm trees.
5. Waterproof strips aren't really waterproof.

Thanks, FrankV. The ones I've seen done with traditional incandescent or leds look really great. But they are dense! Since I am really new to all of this, and am probably going to have less than 4,000 pixels, I am probably going to keep it simple for year #1.

Thanks for the tips!


Reply
Posts: 173
Topic starter
(@smerk)
Estimable Member
Joined: 10 years ago
nutz4lights wrote:Thanks for posting the link Chad!

Smerk, i agree with you on not wanting to waste pixels on the back of the tree. As you can see near the beginning of the video Chad linked above, we only have lights on the front of those palm trees since the back of the tree isn't visible from the street. That being said, our oak tree is only 15 years old. Most of the branches are less than 6 inches in diameter. It was just easier to fully wrap the branches. The trunk could be wrapped just on the front but we wrapped the whole thing around.

Let me know if you can't find our show videos from this year.

Louie

Louie - I did watch your entire walkthrough, and it was easy to find your show videos. I do need to watch them again. When I see shows like yours it gets a bit overwhelming since I'm at square 1. Thanks for posting that!


Reply
Posts: 598
(@nutz4lights)
Honorable Member
Joined: 17 years ago

Sounds good, just let me know if you have any other questions. Regarding your comment about density above, yes, depending on the size of the tree, pixel counts get out of control real quick. Our tree is not huge by any means and we have 1800. I already have plans to throw another 200-300 in next year... a larger tree could easily eat up 4,000 pixels.

Louie

Sent from my SM-G928V using Tapatalk


Reply
Posts: 173
Topic starter
(@smerk)
Estimable Member
Joined: 10 years ago
nutz4lights wrote:Sounds good, just let me know if you have any other questions. Regarding your comment about density above, yes, depending on the size of the tree, pixel counts get out of control real quick. Our tree is not huge by any means and we have 1800. I already have plans to throw another 200-300 in next year... a larger tree could easily eat up 4,000 pixels.

Louie

Well I had 550 pixels (only 25 of them in my display) this past year. I just ordered 2500 mixed 12/5 volt from diyledexpress last week, and now I just doubled that order! (Don't tell my wife!) I got wifal approval to put matrices in the windows which will eat up a lot of them.
Here's a pic of my house. The tree at the front of the property on the far right is actually the left-most of 2 similar trees that I want to wrap. My roof line is really not ideal for Christmas lights so I gotta think outside the box!

I'm planning on a 16x50 megatree on the left (180 degree) with arches and candy canes around it. Probably gonna do pixels through the bushes and maybe mini trees lining the driveway. On the far right I want to have a bunch of white home depot trees with pixels in them (Listen to our lights style, but far less) with some reindeer. I have no idea how many pixels this will take yet as I have yet to set up my xlights "preview". I am officially over my head, but I fear not! 🙂

IMG 20170120 134050973

Reply
Posts: 598
(@nutz4lights)
Honorable Member
Joined: 17 years ago

Ya those trees are huge! Good luck with that... 😛

Honestly, if I were you, I would put off working on those trees for right now. They will be a huge sink of pixels. I'd be afraid that you try to put some into the tree just to get something in there... and it won't look good. You have a huge yard, with plenty of space for, like you said, megatrees, arches, white home depot trees... Your megatree is gonna eat up 800 out of your 5,000. It looks like you have a gutter that runs full left to right on the house, I would do that. Don't worry about the roof line, figure out how to get some lights around your garage door opening, your front door opening, and your window openings, then get a bunch of arches and mini trees in the front yard!

Just my $0.02

-Louie


Reply
Page 1 / 3
Share: