I have a mega tree someone started (24 strands wtih 50 pix ea in 180deg). Each strand is 15' long. Does that mean I need a 10' pole? Or what?
This tree has more strands than most folks put in a 180 deg tree so I am not sure what to do with height. Shorter pole would spread base more but make it look squat. Taller pole would yield a thin tall tree but would it be too dense with 24 strands?
"The sum of the square root of two sides of an isosceles triangle is equal to the square root of the remaining side."
(Extra credit if you can name the movie this quote comes from)
--Jon Chuchla--
Sent from my iPhone using Tapatalk
I use 32 strands for a 180 tree and my pole height is 23 Ft with a 24 inch top ring .
my base ring is 13 ft diameter and the tree is 30 inch off the ground when fully hoisted up .
42 pixels per string and 6 inch spacing .
Also 3 ft of the pole is in the ground .
jchuchla wrote:"The sum of the square root of two sides of an isosceles triangle is equal to the square root of the remaining side."(Extra credit if you can name the movie this quote comes from)
--Jon Chuchla--
Sent from my iPhone using Tapatalk
Thanks, I know basic geometry. And its right triangle, not isosceles triangle. The scarecrow was wrong. Its a mis-quote of the pythagorean theorem.
The question was more about shape and pixel density not about calculating a triangle. For reference, the pixels are attached at 4" centers down the support tapes.
I am asking what, from the experienced users points of view, looks good for proportions on a mega tree? And what would be good for cramming 24 strands into a 180 when I see that the vast majority seem to go for 16 for 180.
I can go up to a 14' pole and get a rough 10' dia base. But is that too narrow for 24 strands? Would it be too densely packed horizontally. 10' pole would, in my estimation look too squat at 22' base. But this is my first mega tree so I need input to help with the asthetic look of it and to accommodate the number of strands.
agnus40, why the elevation? I hadn't seen many that were raised and I had not planned on doing so. Is there an advantage to the elevation (short of keeping the ends of the ground and out of snow)?
Beyond the snow and rain issues , I get hundreds of kids viewing and playing in my display and the elevation keeps them from running through my tree .
People for the most part are respect full and watch their kids but there is a 5-10% margin that let their kids run wild .
Hmm. Handn't considered that aspect. I may not have time to deal with elevating it this year. Do you have a base frame made or do you have the ends tied to stakes in the ground?
I cemented a 3ft abs 4inch pipe with a threaded cap in the ground , my pole slips easily into this pipe and my pole is 3 inch aluminum .
I welded up some 4 inch sleeves that slip over the tree pole and allow for shim legs to keep the pole at a perfect 90 .
No need for guide wires or stakes 🙂
The movie was Wizard of Oz, the scene was when the wizard was giving out their "medals". Scarecrow did the line.
IF you want to stay with the "common standard" (half as wide as tall), 15' angled side would take around 14' 6" of pole. (7' wide base, 15' hypotenuse = 14'6" pole).
The color of the sky is .... (oops, wrong forum)
There is a megatree calculator that shows the angles for x ft high and x ft round. It's in the DIYC wiki I believe. You can find the angle "you" like best.
