Spiral Mega tree fo...
 
Notifications
Clear all

Spiral Mega tree for 2011

17 Posts
13 Users
0 Reactions
12.2 K Views
Posts: 1065
Topic starter
(@olingerjccj)
Noble Member
Joined: 17 years ago
[#13853]

I really wanted to do this for 2010 but did not get around to it. A couple questions. As far as raising it with a classic mega tree you can attach all the lights then raise it. My tree is 16ft. With a spiral tree all the work has to be done after it is raised? If so guess I will have to rent a cherry picker for 2011.
2nd I was thinking on making 4 small trees like 4ft high do you think 3 channels work for that also in a spiral pattern. Really did not want to start planning till Feb or March but I cant help it.

Thanks
John


16 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

I was just thinking the same thing about a Spiral Tree. I use one of the hook heads that slides up the center pole, using a hand winch (works great with traditional Mega Tree strands). Since a Spiral Tree uses like 16 guy wires to support the lights, I am trying to figure a way to tension the wires at a lower height, begin attaching lights in the spiral pattern, and slowly raise the hook head whilst keeping the cables tensioned so it has a nice look when it is at full height. The radius at the ground level of the cables would have to be constantly increasing as the top of the light strands get higher up the pole. Anyone have any ideas????????? (serious ones, that I could actually do :roll:)


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

This was my experience for 2010. We have a 32Ch (16 blue, 16 green) mega tree about the same height as you are considering. We then added 8 channels of red Spirals.
We did not use a EWP due to the cost and in-accessibility. Using 7ft double sided step ladder set up inside the tree was sufficient to cable tie the spirals to the green and blue strings. The first row of cable ties is about 3 feet from the top. the next row is about 6 feet from the top.
When standing on the top of the step ladder make sure someone is holding the ladder. I also insisted my son harness up with the short tether to the mast in case he moved too quickly.


Reply
Andy.wpg
Posts: 523
(@andy-wpg)
Honorable Member
Joined: 17 years ago
rstehle wrote:I was just thinking the same thing about a Spiral Tree. I use one of the hook heads that slides up the center pole, using a hand winch (works great with traditional Mega Tree strands). Since a Spiral Tree uses like 16 guy wires to support the lights, I am trying to figure a way to tension the wires at a lower height, begin attaching lights in the spiral pattern, and slowly raise the hook head whilst keeping the cables tensioned so it has a nice look when it is at full height. The radius at the ground level of the cables would have to be constantly increasing as the top of the light strands get higher up the pole. Anyone have any ideas????????? (serious ones, that I could actually do :roll:)

Never done it, but.....

What if you attached suitable weights to the cables to keep tension on them - move them outward and down on the cables as necessary?

Dunno, just a thought....

Andy


Reply
cbell
Posts: 462
(@cbell)
Honorable Member
Joined: 18 years ago

Could you put the whole thing up, with the guy wires, and have 16 small pulleys at the top, one for each guy wire, then make up 16 ropes, each one like 1' shorter than the last, or whatever it takes to spiral. Attach the 16 ropes together once they run through the pulley and put a single pull rope on them. Then you attach the shortest rope to the light string and perhaps attach the light string to the guy wire with some sort of sliding ring, a notebook ring or something like that, then work your way around attaching to each subsequently longer string, pulling the whole thing up with the pull rope.


Reply
Page 1 / 4
Share: