Small (5 foot) Pixe...
 
Notifications
Clear all

Small (5 foot) Pixel Tree

8 Posts
6 Users
0 Reactions
4,015 Views
Posts: 47
Topic starter
(@mtbehnke)
Trusted Member
Joined: 10 years ago
[#43610]

Just learned about this site and holiday lighting/smart pixels at the beginning of this month and am having fun. After soldering an E682 kit and putting 200 pixels along the eaves, I decided I wanted to add more. Not sure our yard would accommodate a full size mega-tree, but thought a couple small ones would be nice. Don't want to put any stakes in the ground because they'd be frozen into the ground by the end of December.

I used 9 PixNode strips cut in half for the two trees, so the strips are just shy of 48" long and I put 16 pixels each strip at a 3" spacing. The base is 30" diameter and the top is 6" diameter. I used a 5' - 3/4" EMT pipe and made a base out of a 30" piece of 4x4, a couple small pieces of 2x4 and a 2'x4' sheet of plywood. The EMT is inserted into a 15/16" hole drilled about 2" into the base. To hold the top round piece in place I used an EMT hangar (same as shown near top) just underneath it and added a piece of rubber sheet to help keep it from sliding down (layer of duct tape would also work). I also added a small stretch of rope at the back down to the 4x4 to help keep the upper plate level.

Excluding the pixels and strips, these cost around $15 each to build. I cut the parts on my CNC router, but a jig saw would work just as well.

I have some 0.60" plastic sheet coming that I will use to for a star at the top with 20 pixels each.

Thanks for all the great info at this site!

Pixel Tree Base
Pixel Trees
Pixel Tree Finished

7 Replies
codec101
Posts: 355
(@codec101)
Reputable Member
Joined: 13 years ago

Very nice! I upgraded my mini trees to pixels this year. Still using the tomato cages as I have the past three years for structure, I made my own strips out of 1/2" vinyl corner bead I had laying around after a bathroom remodel. I cut those into 30" strips and made up a jig for my drill press to drill holes every 3". I will be interested in how your stars come out, I don't have any sort of topper on mine yet and probably won't this year. Keep us updated!


Reply
Posts: 47
Topic starter
(@mtbehnke)
Trusted Member
Joined: 10 years ago

I was originally planning a pretty simple 5 point / 20 pixel star for the top of my pixel trees. My wife wanted to stop at Hobby Lobby where all their Christmas stuff was 50% off and I found a couple nice 12" tree toppers ($10 each) I thought I could put to good use.

The toppers had a metal spiral embedded into the bottom to mount to the top of a tree so I used my butane torch to heat up the metal until it was able to pull out of the plastic. I then used some black plastic sheet stock that I cut into a hexagon with holes to hold my pixels. I decided to keep the pixels behind the flocked part of the topper to get a softer effect. I also added holes to zip tie the topper to the hexagon piece once the pixels were inserted, then I used a bolt and 1" long spacer to attach it to the EMT hangar at the top of my pole.

Pretty simple to build and I really like the way it lights up.

TreeTopper Backer
TreeTopper
Lighted TreeTopper

Reply
Posts: 57
(@timstreet)
Trusted Member
Joined: 11 years ago
mtbehnke wrote:I was originally planning a pretty simple 5 point / 20 pixel star for the top of my pixel trees. My wife wanted to stop at Hobby Lobby where all their Christmas stuff was 50% off and I found a couple nice 12" tree toppers ($10 each) I thought I could put to good use.

The toppers had a metal spiral embedded into the bottom to mount to the top of a tree so I used my butane torch to heat up the metal until it was able to pull out of the plastic. I then used some black plastic sheet stock that I cut into a hexagon with holes to hold my pixels. I decided to keep the pixels behind the flocked part of the topper to get a softer effect. I also added holes to zip tie the topper to the hexagon piece once the pixels were inserted, then I used a bolt and 1" long spacer to attach it to the EMT hangar at the top of my pole.

Pretty simple to build and I really like the way it lights up.

Very clever!


Reply
Posts: 21
(@kerflop)
Eminent Member
Joined: 12 years ago

Found the post, very nice. Thanks for the details on the build.


Reply
Page 1 / 2
Share: