I noticed from a few YouTube videos that there are some elaborate tree toppers. Most of them look awesome as they appear to be made by some creative welders.
At this point I don't weld and my budget is for building up my lights and controllers but I find myself needing a topper.
Has anyone made one that worked well and was cheap enough for a DIYer to build? like myself.
I would like it to be sturdy enough so it won't shift with the wind.
So far, I have some screw shafts that are 3' long and the diameter is 5/32". I have tried bending them but getting a circle is not turning out very well. I have three others but I don't want to screw them up.
Any ideas would be appreciated.
Buddy
my topper is actually plywood with eye hooks screwed into it and hole in middle for my star too slide down inside the main pvc pole with a bolt and nut that slides through it all too hold the star from spinning I live in Oklahoma had no problems with the wind we get here with my tree oh topper thought you were asking about the top where lights would connect if you are talking about a star or something mine is cheap and easy 8 point pixel topper
I'm planning to go topless.
No welding but ... :unsure:
See how-to (a bit dated but will give you an idea of what's involved)
http://doityourselfchristmas.com/forums/showthread.php?31683-Porcupine-Ball-Starburst-How-to&highlight=starburst
Ron
I've been topless since I put up my megatree. I think it distracts from the tree most of the time. Some smaller ones are O.K. Most are too large by scale to the tree. Also you can add it next year or the year after. Being so high and out of line of sight for the daytime you can hack something together that looks terrible during the day but once the lights come on no one but you will notice.



